Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
TV OPERATION 1 To turn on the TV, press POWER. 2 The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) + or –. The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER. As the sound level increases, so do the number of BARS AND THE NUMBER on the screen. The same is true for decreasing the level. 3 Set the TV/CABLE menu option to the appropriate position. When shipped from the factory, this menu option is in the CABLE setting. See “TO MEMORIZE CHANNELS” on page 9. TV - VHF/UHF channels CABLE - CABLE TV channels 4 CH (CHANNEL) + and – buttons Press and release CH (CHANNEL) + or –. The channel automatically stops at the next channel set into memory. Press and hold the button down to change channels more quickly. For proper operation, before selecting channels, they should be set into the TV's memory. See “TO MEMORIZE CHANNELS” on page 9. DIRECT CHANNEL SELECTION buttons (0–9) -Press these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the previous channel. TV MODE DIRECT CHANNEL SELECTION -When the TV/CABLE menu option is in the TV position, all channels can be instantly selected by using two buttons (For example, to select channel 2, press “0,” then “2.” If you press only “2,” channel selection will be delayed for a few seconds). For channels 10 and above, press the two digits in order. CABLE mode direct channel selection When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows: 1-9 Press “0” twice, then 1-9 as needed. Example, to select channel 2, press “002.” 10-12 Press “0”, then remaining 2 digits. Example, to select channel 12, press “012.” 13-99 Press the 2 digits in order. Example, to select channel 36, press “36.” 100-125 Press the 3 digits in order. Example, to select channel 120, press “120.” NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes. 8 3M12701A-E P08-12 8 5/2/04, 10:02 TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature that allows the TO ADD/DELETE CHANNELS TV to skip up or down to the next channel set into memory, skip 1 Press MENU. ping over unwanted channels. Before selecting channels, they must be programmed into the TV’s Press SET + or – until the indicator next to memory. In addition to normal VHF and UHF channels, this TV can 2 receive up to 113 Cable TV channels. To use this TV with an “CH SETUP” begins to flash, then press antenna, set the TV/CABLE menu option to the TV setting. When ENTER. shipped from the factory, this menu option is in the CABLE setting. 3 Press SET + or – until the indicator TV/CABLE SELECTION next to “ADD/DELETE” begins to flash, 1 Press MENU. then press ENTER. . . AUTO CH MEMORY TV ADD / DELETE CABLE .+ / — / ENTER / MENU . Select the desired channels to be 2 Press SET + or – until the indicator next to 4 “CH SETUP” begins to flash, then press added or deleted using the Direct ENTER. . . AUTO CH MEMORY TV ADD / DELETE CABLE .+ / — / ENTER / MENU . Channel Selection buttons (0–9), CH + or –, SET + or –. 3 Press SET + or – until the indicator next to “TV/CABLE” begins to flash. 5 Press ENTER to select ADD or DELETE. If an unmemorized channel was selected (step 4), the 4 Press ENTER to select the TV or CABLE channel indication will be red. Press ENTER if you wish mode. The arrow indicates the selected mode. to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is 5 Press MENU repeatedly until the menu added and the channel will be memorized. screen is cleared. NOTE: If a memorized channel was selected (step 4), the chan- Contact your cable company to determine the type of cable nel indication will be green. To delete the channel from system used in your area. memory, press ENTER repeatedly until AUTOMATIC CHANNEL MEMORY “DEL” appears on-screen. The channel indicator will change from green to red 1 Press MENU. . . AUTO CH MEMORY TV ADD / DELETE CABLE .+ / — / ENTER / MENU . when a channel is deleted. Repeat steps 4 and 5 for each channel to be 2 Press SET + or – until the indicator next to ADD CH 012 .0 – 9 / + / – / ENTER / MENU . added or deleted. “CH SETUP” begins to flash, then press ENTER. 6 Press MENU repeatedly until the menu screen is 3 Press SET + or – until the indicator next cleared. to “AUTO CH MEMORY” begins to flash, then press ENTER. The TV will begin memorizing all the channels available in your area. Channel numbers will remain red until auto memorizing is complete. 4 Press MENU repeatedly until the menu screen is cleared. ADJUSTING THE PICTURE You can adjust the settings for brightness, contrast, color, tint and sharpness. 4 Press SET + or – to adjust the setting. 1 Press MENU. Press SET + or – until the indicator next to “PICTURE” 2 begins to flash, then press ENTER. 3 Press ENTER repea...
Эта инструкция также подходит к моделям:Телевизоры - 13A24 (1.07 mb)