Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
(If your DVD player/satellite receiver has component video, see page 11. If your DVD player/satellite receiver has DVI/HDCP, see page 14). Do not connect both an S-video cable and a standard video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable. Do not connect the DVD player/satellite receiver and VCR to the same set of A/V inputs on the TV. (See the illustrations, which show the DVD player/satellite receiver connected to VIDEO 1 on the TV, and the VCR connected to VIDEO 2 on the TV.) The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. 10 Connecting a DVD player with component video and a VCR This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. You can record one channel while watching another channel. Your TV has ColorStream® (component video) inputs. Connecting a DVD player with component video outputs (such as a Toshiba DVD player with ColorStream®) can greatly enhance picture quality and realism. –To record one TV program while watching another TV program, tune the VCR to the channel to record and tune the TV to the channel to watch. –To record a TV program while watching a DVD, tune the VCR to the channel to record and select ColorStream HD-1 on the TV (see “Selecting the antenna input” on page 27). You will need: • two coaxial cables • one set of standard A/V cables • one pair of audio cables • one set of component video cables Stereo VCR From Antenna IN from ANT VIDEO AUDIO OUT to TV CH 3 L R CH 4 IN OUT VIDEO OUT S-VIDEO AUDIO COMPONENT VIDEO OUT L R L R PRPBY ANT( 75 ) ANT-1 ANT-2OUT PB PR Y L/ MONO AUDIO S-VIDEO VIDEO 1 VIDEO 2 COLOR STREAM HD-1 COLOR STREAM HD-2 VIDEO R IN L AUDIO R PB PR Y AUDIO VIDEO L/ MONO ON OFF OUT L AUDIO AUDIO VAR R OUT TheaterLink CHANNEL IN AUDIO CENTER DVI/HDCP IN R AUDIO L TV DVD Player with component video Note: For the highest possible picture quality, use component video cables (or a DVI-D digital single-link cable) between the TV and DVD player. You can connect component video cables from the DVD player to either ColorStream jack on the TV (HD-1 or HD-2). The ColorStream HD-1 and HD-2 jacks can be used with Progressive (480p) and Interlaced (480i,1080i) scan systems. A 1080i signal will provide the best picture performance. If your DVD player is not compatible with component video (or DVI/HDCP), use an S-video cable (plus the standard audio cables) instead. Do not connect both S-Video and standard video cables to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable. See page 10. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials i...
Эта инструкция также подходит к моделям:Телевизоры - 46HX83 (3.85 mb)
Телевизоры - 51HX83 (3.85 mb)
Телевизоры - 65HX83 (3.85 mb)
Телевизоры - 46HX83 (3.85 mb)