Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
NOTICE OF POSSIBLE TV STAND INSTABILITY DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH! Use this TV only with the TOSHIBA TV stand listed in the “Specifications” section of this manual. Use with other stands may result in instability, causing possible injury or death. • Place the TV in a location where light does not reflect on the screen. • Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY. 3. Do not plug in any power cords until AFTER you have connected all cables and devices to your T V. 4. BEFORE connecting cables or devices to the T V, learn the functions of the TV’s connections and controls (pages 1012). 5. Connect your other electronic device(s) to the TV (pages 14–30). 6. Connect the G-LI NK® cable (either one of the enclosed I R blaster cables) from your VCR and/or Cable box (if applicable) to the G-LINK® terminal so you can use the TV Guide On Screen® features (applies to VCRs and cable boxes only). See page 28. 7. Install the batteries in the remote control (page 33). 8. See “Learning about the remote control” (page 31) for an overview of the buttons on the remote control. (E) 52/62HMX95 9. Program the remote control to operate your other device(s) (pages 33–39). 10. AFTER connecting all cables and devices, plug in the power cords for your TV and other devices. 11. After you plug in the TV power cord, the green LED (on the TV front touchpad, to the left of the POWER button) will blink while the TV is booting until the remote control is usable. When the green LED stops blinking, press POWER to turn on the TV. See “LED indications” on page 125. 12. See “Menu layout and navigation” for a quick overview of navigating the TV’s menu system (pages 40–41). 13. See Chapter 5 for details on setting up the TV Guide On Screen® system (if available in your area). 14. See Chapter 7 for details on using the TV Guide On Screen® program guide (if available in your area). 15. Program channels into the TV’s channel memory (page 47). 16. Set up the TheaterNet™ on-screen device control feature (if applicable to your particular home theater system components) (page 50). 17. For details on using the TV’s features, see Chapters 8 and 9. 18. For details on using the J PEG Picture Viewer and MP3 Audio Player to view/play files saved on either a memory card or networked PC, see Chapter 10. 19. For details on connecting the TV to a home network to allow file sharing and e-mail scheduling of recordings and reminders, see Chapter 11. 20. For help, refer to the Troubleshooting Guide (Chapter 12). 21. For lamp unit replacement instructions, see Chapter 13. 22. For technical specifications and warranty information, see Chapter 13. 23. Enjoy your new TV! Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 2 2 Connecting your TV TV front panel touchpad and side panel controls and connections GUIDE 2zyx• 4Front panel touchpad* Remote sensor 1POWER 6*Gently touch the printed keys on the touchpad. **The MENU button on the TV front panel touchpad functions as the ENTER button when a menu is on-screen. MENUVOLUME CHANNELEXITTV/VIDEO POWER MENU (ENTER)** 5EXIT 3aChannel zy7Volume x• 8Green/Red LEDs 9TV/VIDEO 3b Front of TV Side panel Right side of TV { { VIDEO-3 IN Memory card 0 slots !. 1 Remote sensor (behind the screen) — Point the remote control toward this area of the TV screen. See “Remote control effective range” on page 32. 2 GUIDE — Press to access the TV Guide On Screen® interactive program guide. (See Chapters 5 and 7.) 3a EXIT — When a menu is on-screen, this button functions as the EXIT button. Press to instantly close an on-screen menu. 3b TV/VIDEO — When no menu is on-screen, this button functions as the TV/VIDEO button (page 72). Repeatedly press to change the input source you are viewing (ANT 1, ANT 2, VIDEO 1, VIDEO 2, VIDEO 3, HDMI 1, HDMI 2, ColorStream HD1, ColorStream HD2, PC). 4 ARROWS yzx • — When a menu is on-screen, these buttons function as up/down/left/right menu navigation buttons. 5 MENU (ENTER) — Press to access the menu system (see pages 40–41). When a menu is on-screen or the TV Guide On Screen® program guide is open, the MENU button on the front touchpad functions as the ENTER button. 6 POWER — Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV front panel and you cannot turn off the TV, press and hold the POWER button on the TV front panel for 5 or more seconds to reset the TV. 7 CHANNEL yz — When no menu is on-screen, these buttons change the channel (programmed channels only; see page 47). When a menu is on-screen, these buttons function as up/down menu navigation buttons. 8 VOLUME x • — When no menu is on-screen, these buttons adjust the volume level. When a menu is on-screen, these buttons function as left/right menu navigation buttons. 9 Green and Red LEDs When the red LED ...
Эта инструкция также подходит к моделям:Телевизоры - 62HMX95 (7.27 mb)
Телевизоры - 52HMX95 (7.27 mb)
Телевизоры - 62HMX95 (7.27 mb)