Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
To block channels in the channel memory: You can block specific channels. You will not be able to tune blocked channels unless you unlock them. (. Page 41 Locking channels) To manually add digital subchannels on a physical channel: Use the Channel Numbers and the Dash ( )on the remote control to enter the channel number (for example, 56–1). If the channel is found, the number will be added to the list and the box will be unchecked. If the channel is not found, a message will appear. Note: Skipped channels cannot be selected with or ; however, they can still be accessed using the number keys on the remote control. To remove encrypted channels from the channel memory: If an encrypted channel is accidentally added to the channel list by programming channels, you can remove the unwanted encrypted (non-viewable) channel while you are channel surfing. When you tune to an encrypted channel, the following message will appear. Setting the HDMI® audio mode To set the HDMI audio mode: and open the Sound menu. 1. Press 2. Highlight Audio Setup and press . 3. Press • or • to select HDMI 1 Audio and then press • or • to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” (. page 16). Mode Description When viewing the HDMI 1 input, if digital audio from the HDMI input is Auto available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input. When viewing the HDMI 1 input, Digital digital audio from the HDMI input will be output. When viewing the HDMI 1 input, Analog analog audio from the PC Audio input will be output. 4. To save your settings, highlight Done and press . Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 2 on page 12 and “Setting the PC Audio” on page 43.) DigitalChannelIsEncryptedPress1onremotetoremovechannel Press while the message is on the screen to remove the unnecessary channel from the channel list. Viewing the digital signal meter You can view the digital signal meter in the ANT/ CABLE digital TV input source only. To view the digital signal meter: and open the Setup menu. 1. Press 2. Highlight Installation and press . 3. Anew set of Installation menu icons will appear. Open the Terrestrial menu, highlight Signal Meter, and press . 4. Press pqt• to select the antenna input and digital channel whose signal you want to check. Note: • The physical digital channel number listed in the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the...
Эта инструкция также подходит к моделям:Телевизоры - 32C110U1 (6.07 mb)
Телевизоры - 40E210U1 (6.07 mb)
Телевизоры - 32C110U1 (6.07 mb)
Телевизоры - 40E210U1 (6.07 mb)