Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
To listen to an alternate language on an ATSC digital station (if available): Highlight the Language field in step 2 above, and then press C or c to select the language you prefer. To listen to a second audio program on an analog station (if available): Select SAP in step 2. Note: • A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio. • If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode. 46 Adjusting the audio quality You can adjust the audio quality by adjusting the bass, treble, and balance. To adjust the audio quality: 1 From the Audio menu, highlight Audio Settings and press T. 2 Press b or B to highlight the item you want to adjust (Bass, Treble, or Balance). 3 Press C or c to adjust the level. • C makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected). • c makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected). 4 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T. Using the StableSound® feature The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound® feature: 1 From the Audio menu, highlight Audio Settings and press T. 2 In the StableSound field, select On. 3 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: The RESET function returns your audio adjustments to the following factory settings: Bass . . . . . . . . center (50) Treble . . . . . . center (50) Balance . . . . . center (0) StableSound . Off To turn off the StableSound feature: Select Off in step 2 above. RV535U (E/F) Web 213:276 Chapter 6: Using the TV’s features 52RV535U_EN.book Page 47 Tuesday, July 22, 2008 5:25 PM Chapter 6: Using the TV’s features 52RV535U_EN.book Page 47 Tuesday, July 22, 2008 5:25 PM Selecting the optical audio output format You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the DIGITAL AUDIO OUT terminal on the TV (- “Connecting a digital audio system” on page 18). To select the optical audio output format: 1 Tune to a digital source on the ANT/CABLE input. 2 From the Audio menu, highlight Audio Setup and press T. 3 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device. 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Using the Dolby® Digital Dynamic Range Control feature This dynamic range control feature causes the ATSC dynamic range to be further compressed, allowing you to switch from digital to analog broadcasts at the same dynamic range. To use the Dolby Digital Dynamic Range Control: 1 From the Audio menu, highlight Audio Setup and press T. 2 In the Dolby Digital Dynamic Range Control field, select Compressed. When Standard is selected, the audio is output with minimal compression. 3 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: • This item will be grayed out for NTSC signals, Video, ColorStream, HDMI, and PC inputs. • Dolby Digital Dynamic Range Control will function in relation to Optical Output Format (PCM mode). Using the Locks menu The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Channels Block, Input Lock, Control Panel Lock, Game Timer, and New PIN Code features. You can use these features after entering the correct PIN code. Entering the PIN code 1 On the remote control or TV control panel, press Y and highlight the Locks menu icon. 2 Press b, which displays the PIN code entry screen. • The Lock System screen (below) appears if a PIN code has not been stored. Press the Channel Number buttons to enter a new four-digit code, enter the code a second time to confirm, and press T. Input Lock New PIN Code Control Panel Lock Enable Rating Blocking Channels Block Off Off Off Game Timer Off Edit Rating Limits Locks Please enter a 4 digit PIN code Confirm PIN code Cancel Done Lock System • The Locks/Active screen appears if the PIN code is already stored. Use the Number buttons to enter your four-digit code and press T. If the wrong PIN code is entered, the message “Incorrect PIN code, please try again!”...
Эта инструкция также подходит к моделям:Телевизоры - 46RV535U (3.04 mb)
Телевизоры - 52RV535U (3.04 mb)
Телевизоры - 42RV535U (3.04 mb)
Телевизоры - 46RV535U (3.04 mb)