Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
It works only in RGB (PC) mode. ¡Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set 19. Tune Command (Command: m a) ► Select channel to following physical number. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No. 0 -> Don’t care Data02 : Antenna/Cable : 0x00 : Analogue Main 0x10 : DTV Main 0x20 : Radio Satellite : 0x40 : DTV Main 0x50 : Radio Channel data range Analogue - Min: 00 to Max: C7 (0 to 199) Digital - Min: 00 to Max: 270F (0 to 9999) Ack [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 to Max: 7DH Ack [u][ ][Set ID][ ][OK/NG][Data][x] EXTERNAL CONTROL DEVICE SETUP 153 20. Programme Add/Skip(Command: m b) ► To set skip status for the current Programme. ¡Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip 01 : Add Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Real data mapping 00 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255 21. Key(Command: m c) ► To send IR remote key code. ¡Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code (See p.145) Ack [c][ ][Set ID][ ][OK/NG][Data][x] 22. Control Back Light(Command: m g) ► To Control the back light. ¡Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] 23. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB LSB I0l0l0l0l0l0l0l0l I—External Input J L Input Number _l External Input Data 0 0 0 0 DTV 0 0 0 1 Analogue 0 0 1 0 AV 0 1 0 0 Component 0 1 1 0 RGB 0 1 1 1 HDMI 1 0 0 0 1 0 0 1 1 0 1 0 Input Number Data 0 0 0 0 Input1 0 0 0 1 Input2 0 0 1 0 Input3 0 0 1 1 Input4 Ack [b][ ][Set ID][ ][OK/NG][Data][x] * In case external input data is DTV, Input number '0’ is AIR, '1’ is CATV and '2’ is SATELLITE. ENGLISH ENGLISH 154 EXTERNAL CONTROL DEVICE SETUP 24. 3D(Command: x t) (only 3D models) ► To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data01][ ][Data02] [ ][Data03][ ][Data04][Cr] Data01 00 : 3D On 01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D Data02 00 Top and Bottom 01 : Side by Side 02 : Check Board 03 Frame Sequential Data03 00 : Right to Left 01 : Left to Right Data04 3D Depth : Min: 0 ~ Max: 14 * Refer to 'Real data mapping’.(See p.153) *If data1 is 00(3D On), data4 has no meaning. *If data1 is 01(3D off) or 02(3D to 2D), data2, data3 and data4 have no meaning. *If data1 is 03(2D to 3D), data2 and data3 have no meaning. Datal Data2 Data3 Data4 00 O O X 01 X X X 02 X X X 03 X X O X : don't care 25. Extended 3D(Command: x v) (only 3D models) ► To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data01][ ] [Data02][Cr] Data01 : 3D option 00 : 3D Picture Correction 01 : 3D Depth (2D to 3D Only) 02 : 3D Viewpoint 05 : 3D Optimization Data02 It has own range for each 3D option determined by Data01. 1) When Data01 is 00 00 : Right to Left 01 : Left to Right 2) When Data01 is 01 Data Min: 0 ~ Max: 14 3) When Data01 is 02 Data Min: 0 ~ Max: 14 (Except for 72LZ97**) Data value range(0 to 20) converts Viewpoint range(-10 to 10) automatically. Data Min: 0 ~ Max: 06 (Only 72LZ97**) Data value range(0 to 20) converts Viewpoint range(-3 to 3) automatically. 4) When Data01 is 05 Data Min: 0 ~ Max: 02 * Refer to 'Real data mapping’.(See p.153) Ack [v][ ][OK][Data01][Data02][x][v][ ][NG] [Data01][x] * Use the feature depending on your model. Ack [t][ ][OK][Data01][Data02][Data03][Data04][x] [t][ ][NG][Data01][x] OPEN SOURCE LICENSE 155 OPEN SOURCE LICENSE Please be informed that LG Electronics products may contain open source software listed in the tables below. License Component Apache license bonjour MIT license cares fontconfig libcurl libxml2 libxslt lua interpreter expat license expat Freetype license freetype JPEG license libjpeg OpenSSL license openssl Zlib/libpng libmng license libpng zlib portmap license portmap pixman license pixman X.net license libicu BSD license netBSD Simple XML Parser xySSL RSA Data security license MD5 JSON license JSON MS92 license snacc LG Electronics products may also contain open source software listed as Components in the table below, and you may download the complete source code thereof free of charge, from LG Electronics website (for a period of three (3) years from our last shipment of this product. Please be informed that the open source software is subject to the terms and conditions of the applicable open source licenses, which are provided to you herein below. License Component GNU GPL v2.0 Linux kernel 2.6 busybox e2fsprogs gdbserver jfsutils lzo msdl 1.1 mtd-utils ntpclient procps GNU LGPL v2.1 a...
Эта инструкция также подходит к моделям:Телевизоры - 32LV571S (9.25 mb)
Телевизоры - 42LV571S (9.25 mb)
Телевизоры - 42LV770S (9.25 mb)
Телевизоры - 42LW573S (9.25 mb)