Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Press the Navigation buttons to scroll to Antenna and press OK. 5 Select Start to start automatic tuning. The TV scans and saves available programmes automatically. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. 4 When the basic settings are complete, press OK. NOTE yyIf you do not complete the Initial setting, it will appear whenever the TV turns on. yyDisconnect the power cord from the power outlet when you do not use the TV for a long period of time. 5 To turn the TV off, press (POWER). NOTE yyIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. yyYou can store up to 1,000 programmes. The number of programmes that you can store differs depending on the broadcasting signal environment. yy Automatic Numbering: Decide whether to use the programme numbers as sent by broadcasting stations for tuning. yyWhen select Italy in the Country menu, if the pop up is displayed when the conflicted programme after Auto Tuning, select a broadcaster for conflicting programme number to solve. yyIn the following country, DVB cable can be used : Germany, Netherlands, Sweden, Switzerland, Denmark, Austria, Finland, Norway, Slovenia, Hungary, Ukraine, Ireland, Poland, Romania, Spain, Bulgaria, Russia, Lithuania, Estonia, Latvia. (The supported country can be added.) yyIn the following country, Digital TV can not be used : Bosnia, Kazakhstan. (Only Plasma TV). Watching TV 1 In Standby mode, press (POWER) to turn the TV on. 2 Press INPUT and select Antenna. 3 To turn the TV off, press (POWER). The TV switches to Standby mode. Selecting Cable, yyAcquired certification SO : Sweden(Comhem, Canal Digital), Denmark(YouSee, Canal Digital, Stofa), Norway(Canal Digital), Netherlands(Ziggo, UPC Digitaal), Ukraine(Volia-Cable), Germany(KDG), Switzerland(CableCom, UPC), Austria(UPC Digital), Hungary(UPC Digital), Ireland(UPC Digital), Poland(UPC Digital), Romania(UPC Digital), Russia(OnLime)(The acquired certification SO can be added.) yyIf there are not any Service Operator that you want, select Other Operators. yyIf you select “Other Operators”, or the selected country supports “Other Operators” only, it may take some time to search all the channels, or it may not search some of the channels. yyIf some of the channels do not appear, follow the steps below: 1. SETUP -> Auto Tuning -> Cable -> Setting 2. Switch Home Tuning from "Off" to "On" 3. Input additional values such as the frequency, symbol rate, modulation, and network ID. (You can ask your cable service provider for the above information.) 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Press the Navigation buttons to scroll to Cable and press OK. 5 Press the Navigation buttons to scroll to Comhem or Other Operators and press OK. 6 Press the Navigation buttons to scroll to Quick or Full and press OK. 7 Press the Navigation buttons or Number buttons to scroll make appropriate adjustments (Except for Full mode) and press OK. 8 Select Start to start automatic tuning. The TV scans and saves available programmes automatically. 9 When you are finished, press EXIT. When you return to the previous menu, press BACK. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels. In the case when the programme is not searched by selecting the Default, perform the searching by selecting the Full. However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be taken too much. If some channels are not detected when Full is selected, select the In detail checkbox and then try tuning again. • Frequency : Enter a user-defined frequency. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). • Network ID : Unique identifier allocated for each user. • Start Frequency : Enter a user-defined start frequency range. • End Frequency : Enter a user-defined end frequency range. NOTE yyIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. yyWhen you select the Cable, the Cable Service Operator selection screen can differ or not exist by the Cable situation of the applicable country. yyThe popup window to select Service Operator is only shown initially for ...
Эта инструкция также подходит к моделям:Телевизоры - 22LV2300 (10.16 mb)
Телевизоры - 32LK530 (10.16 mb)
Телевизоры - 32LV4500 (10.16 mb)
Телевизоры - 42LK530 (10.16 mb)