Войти:
Оценок - 3, средний балл: 3.3 ( )

Инструкция по эксплуатации Samsung, модель SP-67L6HV

Производитель: Samsung
Размер: 3.7 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Sold Separately . When installing the product, make sure to keep it away from the wall (more than 10cm) for ventilation purposes. • Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance. Checking Parts Power Cord Warranty Card/ Safety Guide Manual (Not available in all locations) S-VIDEO Cable PC Cable HDMI Cable HDMI/DVI Cable Component Cables PC Audio Cable (RCA) Antenna Cable Scart Cable . The actual configuration on your TV may be different, depending on your model. English - 6 Control Panel Switch the TV On and Off Front of the TV (SP46L6HV/SP50L6HV/SP61L6HV/SP67L6HV) Front of the TV (SP56K3HV) Switch the TV On and Off LED Indicators Picture On/Off Remote Control Sensor Switch among video input modes Display the on-screen menu Adjust the volume Select the channels Access to the selected option on the menu system continued... Picture On/Off Remote Control Sensor Adjust the volume Access to the selected option on the menu system Select the channels Switch among video input modes LED Indicators Display the on-screen menu ( :On, :Blinking, :Off) TIMER LAMP STAND BY/TEMP Indication Standby mode. A timer pilot lights when Timer Auto On or Off is selected. Normal operation. Normal operation (when Timer Auto On or Off is selected). Lamp is warming up. The normal picture comes on after 25 seconds. The normal picture comes on after 25 seconds. (when Timer Auto On or Off is selected) Air vent cover in the rear of the TV is not properly installed. Inside temperature of the TV is over normal. Clean the air vent cover in the rear of the TV. Turn the TV back on after 1 hour. The lamp does not work, please contact an authorized Service Center for assistance. .. It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. . The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working. . You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model. . When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the …/†/oe/v buttons on the remote control. . If the remote control no longer works or you have lost it, you can use controls on the panel of the TV. . Press the "I" side of the POWER switch to supply power to the TV. If the "I " side of the POWER switch is not pressed, the POWER button on the remote control and the Picture On/Off switch on the front panel of the TV will not work. English - 7 The actual configuration on your TV may be different, depending on your model. English - 8 Connection Panel . Side of the TV (SP46L6HV/SP50L6HV/SP61L6HV/SP67L6HV Video Input Audio Input S-Video Input continued... ) Side of the TV (SP56K3HV) Side of the TV (SP56K3HV) Video Input Audio Input S-Video Input continued... English - 9 English - 10 Rear of the TV a) EXT 1(RGB), 2(Y/C) Inputs or outputs for external devices, such as VCR, DVD, video game consoles or Cable/Satellite sources. b) COMPONENT IN Video (Y/PB/PR) and audio (AUDIO L/R) inputs for Component. c) PC IN (PC / AUDIO) Connect to the video and audio output jack on your PC. d) HDMI/DVI IN Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC) e) DVI IN (AUDIO L/R) DVI audio inputs for external devices. f) AUDIO OUT Connect to the external audio amplifier. g) SERVICE Service connection for qualified service engineer. h) ANT IN Coaxial connector for Aerial/Cable Network. . For further details about connection, refer to pages 55~59. . Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. English - 10 Rear of the TV a) EXT 1(RGB), 2(Y/C) Inputs or outputs for external devices, such as VCR, DVD, video game consoles or Cable/Satellite sources. b) COMPONENT IN Video (Y/PB/PR) and audio (AUDIO L/R) inputs for Component. c) PC IN (PC / AUDIO) Connect to the video and audio output jack on your PC. d) HDMI/DVI IN Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC) e) DVI IN (AUDIO L/R) DVI audio inputs for external devices. f) AUDIO OUT Connect to the external audio amplifier. g) SERVICE Service connec...

Эта инструкция также подходит к моделям:
Телевизоры - SP-50L6HV (3.7 mb)
Телевизоры - SP-56K3HV (3.7 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории