Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
. When setting is completed, move to Search and press the ENTERE button. Channel scan is started. Satellite System Setup The PIN input screen appears. Enter your 4 digit PIN number. Satellite System Setup is available when Antenna is set to Satellite. Before runZning Auto Store, set Satellite System Setup. Then channel scan is run normally. ¦ Satellite Selection: You can choose the satellites for this TV. ¦ LNB Power (Off/On): Enables or disables the power supply for the LNB. ¦ LNB Settings: Configures the outdoor equipment. – Satellite: Selects the satellite for receiving digital broadcasts. – Transponder: Selects a transponder from the list or adds a new transponder. – DiSEqC Mode: Selects DiSEqC mode for the selected LNB. – Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency. – Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency. – Tone22kHz(Off/On/Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto. – Signal Quality: Display the current status of broadcasting signal. ¦ Positioner Settings: Configures the antenna positioner. Positioner (On/Off): Enables or disables the positioned control. PositionerType (USALS/DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System). – My Longitude: Sets the longitude for my location. – My Latitude: Sets the latitude for my location. – Satellite Longitude Settings: Sets the longitude of user defined satellites. User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position. – Satellite: Selects the satellite to set the position for. – Transponder: Selects a transponder from the list for signal reception. – Moving Mode: Selects the movement mode between discrete and continuous movement. – Step Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is set to Step. 03 Basic Features English 15 Basic Features –– Go to Stored Position:–Rotates–the–antenna–to–the– stored–satellite–position.– –– Antenna Position:–Adjusts–and–stores–the–antenna– position–for–the–selected–satellite.– –– Store Current Position:–Stores–current–position–as– the–selected–positioner–limit.– –– Signal Quality:–Display–the–current–status–of– broadcasting–signal. Installer Mode:–Sets–limits–to–the–scope–of–movement– of–satellite–antenna–or–reset–the–position.–Generally,– installation–guide–uses–this–function. –– Limit Position (East / West):–Selects–the–direction–of– the–positioner–Limit.– –– Antenna Position:–Adjusts–and–stores–the–antenna– position–for–the–selected–satellite.– –– Store Current Position:–Stores–the–current–position– as–the–selected–positioner–Limit.– –– Go to Zero:–Moves–the–antenna–to–the–reference– position.– –– Reset Positioner Limit:–Allows–the–antenna–to–rotate– over–the–full–arc. ¦– Reset All Setting (OK / Cancel):–All–satellite–settings–will– be–reset–to–the–initial–values. ¦ Editing Channels Channel Manager Option Menu (in–Channel Manager) 1. Select–a–channel–and–press–the–TOOLS–button.– 2. Edit–the–channel–name–or–number–using–the– Edit Channel Name–or–Edit Channel Number–menu. ¦– Edit Channel Name–(analogue–channels–only):–Assign– your–own–channel–name.– ¦– Edit Channel Number–(digital–channels–only):–Edit–the– number–by–pressing–the–number–buttons–desired. ¦ Other Features Cable Search Option (depending–on–the–country)– Sets–additional–search–options–such–as–the–frequency–and– symbol–rate–for–a–cable–network–search. ¦– Freq.Start / Freq.Stop:–Set–the–start–or–stop–frequency– (differs–in–each–country)– ¦– Symbol Rate:–Displays–available–symbol–rates.– ¦– Modulation:–Displays–available–modulation–values. Channel Manager Channel Manager Option Menu Set–each–channel–using–the–Channel Manager–menu–options– (Lock / Unlock, Timer Viewing, Timer Recording, Sort, Reorder, Delete, Select All / Deselect All).–Option–menu– items–may–differ–depending–on–the–channel–status. 1. Select–a–channel–and–press–the–TOOLS–button.– 2. Select–a–function–and–change–its–settings. ¦– Lock / Unlock:–Lock–a–channel–so–that–the–channel– cannot–be–selected–and–viewed. .– NOTE x–This–function–is–available–only–when–the–– Child Lock–is–set–to–On. x–The–PIN–input–screen–appears.–Enter–your– 4-digit–PIN,–the–default–of–which–is–“0-0-0-0”.– Change–the–PIN–using–the–Change PIN–option. ¦– Timer Viewing:–You–can–set–a–desired–channel–to–be– displayed–automatically–at–the–reserved–time.–Set–the– current–time–first–to–use–this–function.– .–When–a–digital–channel–is–selected–in–– Channel Manager,–press–the–>–button–to–view– the–digital–Programme. ¦– Timer Recording–(digital–channels–only):–Allows–you–to– record–a–programme–currently–being–broadcasted–or– make–a–reservation–to–record–a–programme–scheduled– for–broadcast. .–A–USB–dev...
Эта инструкция также подходит к моделям:Телевизоры - UE40C7700WZ (20.33 mb)
Телевизоры - UE46C7700WS (20.33 mb)
Телевизоры - UE46C7700WZ (20.33 mb)