Войти:
Оценок - 4, средний балл: 3.3 ( )

Инструкция по эксплуатации Samsung, модель UE32EH6030K

Производитель: Samsung
Размер: 1.8 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


NNNOTE ..Precautions and limitations for game mode ––To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. ––If you display the TV menu in Game Mode, the screen shakes slightly. . . English .. Game Mode is not available in TV mode. ..After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. ..If Game Mode is On: –– Picture Mode is set to Standard and Sound Mode is set to Movie. ..Panel Lock (Off / On): Lock or unlock all the keys on the panel. ..Boot Logo (Off / On): Display Samsung logo when the TV is turned on. . . English ¦¦DivX® Video On Demand OOMENUm > System > DivX® Video On Demand > ENTERE Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file. Once you play it using Videos, the registration is completed. NNFor more information on DivX® VOD, visit . . English ¦¦Common Interface OOMENUm > System > Common Interface > ENTERE ..CI Menu: This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. ..CAM video transcoding: You can configure the setting to transcode the video codec from the CAM automatically. Turn it Off if you do not want to use it. NNYou must use a CAM that supports transcoding the video codec. . . English ..Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off. 1. Purchase a CI CAM module at your nearest dealer or by phone. 2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow. 3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot. 4. Check if you can see a picture on a scrambled signal channel. ..Support Menu ¦¦e-Manual OOMENUm > Support > e-Manual > ENTERE You can read the introduction and instructions about the TV features stored in your TV. NNFor the detailed information about e-Manual Screen, refer to “How to use the e-Manual” in User Manual. . . English ¦¦Self Diagnosis OOMENUm > Support > Self Diagnosis > ENTERE NNSelf Diagnosis might take few seconds, this is part of the normal operation of the TV. ..Picture Test (Yes / No): Use to check for picture problems. ..Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. NNIf you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. for LED 6 series NNThe melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. for LED 6 series . . English ..Signal Information (digital channels only): HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your aerial to increase signal strength. ..Reset: Reset all settings to the factory defaults except network settings. NNThe PIN input screen appears before the setup screen. NNEnter your 4-digit PIN. Change the PIN using the Change PIN option. ..Troubleshooting: If the TV seems to have a problem, refer to this description. NNIf none of these troubleshooting tips apply, contact the Samsung customer service centre. . . English ¦¦Software Update OOMENUm > Support > Software Update > ENTERE Software Update can be performed by downloading the latest firmware from “to a USB memory device. Current Version-the software already installed in the TV. Installing the Latest Version ..By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. . . English ..Online for LED 6 series : Upgrade the software using the Internet. NNFirst, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Settings” instructions. NNIf the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade. . . English ..By Channel: Upgrade the software using the broadcasting signal. NNIf the function is selected during the software transmission period, software will be automatically searched and downloaded. NNThe time required to download the software is determined by the signal status. ..Alternative Software: Replace the current software with the alternative. ..Standby Mode Upgrade (Off / 1 hour lat...

Эта инструкция также подходит к моделям:
Телевизоры - UA32EH4003W (1.8 mb)
Телевизоры - UE32EH4003W (1.8 mb)
Телевизоры - UE39EH5003W (1.8 mb)
Телевизоры - UA32EH6030W (1.8 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории