Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(Network > Network Settings) 2. Select Start. The network function searches for available wireless networks. When done, it displays a list of the available networks. 3. Select the WPS(PBC). 4. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 5. The network connection screen appears, and network setup is done. Plug & Access Network Setup The Plug & Access function lets you easily connect your Samsung TV to your Samsung wireless router (sold separately) by using a USB memory stick to transfer the setup information from the router to the TV. If your non-Samsung wireless router does not support Plug & Access, you must connect using one of the other methods. N You can check for equipment that supports Plug & Access on samsung.com. To set up your TV's wireless network connection using Plug & Access, follow these steps: 1. Turn on the Samsung wireless router and your TV. 2. Insert a USB memory stick into the USB port in your Samsung wireless router. Check the router’s LED’s to make sure it is on (Blinking > on). 3. Take the USB memory stick out of the router, and then insert it into a USB port on your Samsung TV. The memory stick downloads the connection information. 4. Wait until the connection is automatically established. N If Plug & Access does not connect your TV to your wireless router, a popup screen appears on the screen notifying you of the failure. If you want to try using Plug & Access again, disconnect the USB memory stick, reset the router, and then try again from Step 1. You can also choose one of the other connection setup methods. 5. The network connection screen appears, and the network setup is done. N If the wireless router’s settings change or you install a new wireless router, you must perform the Plug & Access procedure again, beginning from Step 1. Network Status Menu > Network > Network Status You can check the current network and Internet status. If the wireless network connection failed... . Wireless network connection failed. No wireless router selected. Go to Network Settings to select your router. . Unable to connect to wireless router. Try the following: check if the router is turned on, and if it is, try turning it off and on again. Check if you need to enter a security key to use the router. . IP auto setting failed. Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. 1) Ensure that DHCP server is enabled on the router. 2) Unplug and re-plugin the router. 3) Contact your Internet Service Provider for more information. . Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information. . Connected to your local network, but cannot connect to the Internet. Check the DNS settings in IP Settings, or contact your Internet Service Provider to access the Internet. . Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet. Managing the Network Connected Devices Wi-Fi Direct Menu > Network > Wi-Fi Direct Set to connect the TV to wireless mobile devices. Using this function, you can connect wireless mobile devices to your TV directly without a router. N To use this function, your mobile device should be supported by the Wi-Fi Direct. N for LED 5500 - 5700 Series and PDP 550 - 570 Series You can use this function when connecting the Samsung Wireless LAN Adapter. (May not be available, depending on your model.) To connect your mobile device with your TV using Wi-Fi Direct, follow these steps: 1. Turn on the Wi-Fi Direct device and activate its Wi-Fi Direct function. 2. Go to the Wi-Fi Direct screen. (Network > Wi-Fi Direct) The TV starts to search devices and then displays the devices on the Wi-Fi Direct screen. 3. Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device. – For PBC: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. – For PIN: Input the displayed PIN on your device. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. N If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect. N The TV and BD products perform the role of the Group Owner. If a TV or BD is connected via Wi-Fi Direct, the connected device is represented as a Group Owner in the Wi-Fi Direct list. However, even in this case, the TV cannot connect to another TV or BD through Wi-Fi Direct. Soft AP Menu > Network > Soft AP Using this function, you can connect the TV to your mobile devices if your mobile devices do not support Wi-Fi Direct. The So...
Эта инструкция также подходит к моделям:Телевизоры - PS43E450A1W (2.15 mb)
Телевизоры - PS51E550D1K (2.15 mb)
Телевизоры - PS51E550D1P (2.15 mb)
Телевизоры - PS51E550D1W (2.15 mb)