Оценок - 5, средний балл: 4.2
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - PS-50P2HT (3.55 mb)
Телевизоры - PS-50P2HT (5.95 mb)
Фрагмент инструкции
Preset to the PC mode by using the Source button. Press the Menu button. Result: The main menu is displayed. Move the joystick up or down to select the SETUP menu and press the joystick button. Result: The Image Lock menu is selected. Press the joystick button again. Result: The options available in the IMAGE LOCK group are displayed. Move the joystick up or down to select the Auto Adjustment menu. Result: The Reset Freq./Phase/Position message is displayed. Press the joystick button again. Result: The screen becomes black and return to original view about a few seconds later. When you have finished, press the Menu button repeatedly to return to normal viewing. 39 S E T U P Image Lock Scale A4:3 . Auto Power On On Panel Lock Off Miscellaneous Move Select Exit ENG IMAGE LOCK Frequency Phase Position Auto Adjustment Reset Freq./Phase/Position Move Enter Exit Changing the Screen Size . Preset to the PC mode by using the Source button. Press the Menu button. Result: The main menu is displayed. Move the joystick up or down to select the SETUP menu and press the joystick button. Move the joystick up or down to select the Scale option. Select the required option (Wide, 4:3) by moving the joystick left or right repeatedly. When you are satisfied with the settings, press the Menu button repeatedly to return to normal viewing. 40 ENG Enjoying the PIP Feature in PC mode Source AV 2 Sound AMain . Size Large Locate Move Select Exit P I P Select On Source AV 2 Sound Main Size Large Locate Move Select Exit P I P Select On Adjust Exit PIP Panning . Preset to the PC mode by using the Source button. 1 Press the Menu button. Result: The menus available are displayed. 2 Move the joystick up or down to select the PIP menu and press the joystick button. Result: The Select option is selected. 3 Set to On by moving the joystick left or right. Result: The options available in the PIP group are displayed. 4 Move the joystick up or down to select the Sound option and move the joystick left or right repeatedly. Result: The followings are displayed. You can select your required sound of main or sub picture. Main - Sub 5 Move the joystick up or down to select the Locate option and move the sub picture where you want by using the joystick. 6 When you have selected, press the Menu button repeatedly to return to normal viewing. . . The size of sub picture can depend on the resolution of PC. . For selecting the external source and size of the sub picture, refer to page 26. Power Saver (PC Mode Only) ENG This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. State Normal Operation Power-Saving Function mode Stand-by Mode Suspend Mode Power-Off Mode Position A1 Position A2 Horizontal Sync Active Inactive Active Inactive Vertical Sync Active Active Inactive Inactive Video Active Blanked Blanked Blanked Power Indicator Green Red Blinking (1 sec interval) Red Blinking (1 sec interval) Red Blinking (1 sec interval) . . This monitor automatically returns to normal operation when horizontal and vertical sync return. . This occurs when moving the computer’s mouse or pressing a key on the keyboard. . For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. 41 Multiple Display Control (MDC) ENG A multiple display control is an application allowing various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. . . Before using the RS-232C control function, confirm whether each ID of the PDPs that you want to control is set or not, and they are individual each other. If not, first set your ID number. (Refer to “Setting the Multiple Display Control (MDC)” on page 43.) . When controlling more than four PDPs or using an extra cable, not the serial cable which is included in PDP, the MDC maybe operate abnormally. 42 . Computer Requirements (Recommended) OS : Windows 95, 98, ME, 2000, XP Home, XP Professional. CPU : Pentium II RAM : 64M VGA : 800 X 600, 256 Color CD-ROM : 4X Communication Port : RS-232C Compatible Serial Male Type 9Pin (COM1). 25-pin to 9-pin male converter. . other models. . Computer Requirements (Recommended) OS : Windows 95, 98, ME, 2000, XP Home, XP Professional. CPU : Pentium II RAM : 64M VGA : 800 X 600, 256 Color CD-ROM : 4X Communication Port : RS-232C Compatible Serial Male Type 9Pin (COM1). 25-pin to 9-pin male converter. . other models. Setting the Multiple Display Control (MDC) 43 ENG Move Select Exit ...
Эта инструкция также подходит к моделям:Телевизоры - PPM42P2S (25.25 mb)
Телевизоры - PS-42P2ST (25.25 mb)
Телевизоры - PS-42P2STR (25.25 mb)
Телевизоры - PS-42P2STS (25.25 mb)