Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Samsung, модель UE46C6700US

Производитель: Samsung
Размер: 21.69 mb
Название файла:
Язык инструкции:itenfrde
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


– Use the direction buttons on your remote to move from button to button on the Security Key screen. – Press the Red button to change case or display symbols/characters. – To a enter letter or symbol, move to the letter or symbol, and then press the ENTERE button. – To delete the last letter or number you entered, press the Green button on your remote. 9. When done, press the Blue button on your remote. The Network Connecting screen appears. 10. Wait until the connection confirmation message is displayed, and then press the ENTERE button. The Network Setup screen re-appears. 11. To test the connection, press the RETURN button to select NetworkTest, and then press the ENTERE button. 32 English Network Setup (Ad-Hoc) You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network. . This function is available when SWL(Samsung WirelessLink)is set to Off. How to connect to new Ad-hoc device 1. Follow Steps 1 through 6 in the “How to set up using PBC (WPS)” (p. 31). 2. Choose Select a Network. A list of devices/networks appears. 3. While in the device list, press the Blue button on the remote. . The message Ad-hocis adirectWi-Fi connection with cellphone orPC.The existing network system mayhavelimitedfunctionality. Doyou wantto changethe network connection? is displayed. 4. Input the generated Network Name (SSID) and Security Key into the device you want to connect. How to connect an existing Ad-hoc device 1. Follow Steps 1 through 6 in the “How to set up using PBC (WPS)” (p. 31). 2. Choose Select a Network. The Device/Network list appears. 3. Select the device you want in the Device list. 4. If security key is required, input the security key. . If network doesn’t operate normally, check the NetworkName(SSID) and SecurityKey again. An incorrect SecurityKey may cause a malfunction. Network Setup (Manual) If the other methods do not work, you need to enter the Network setting values manually. Getting the Network ConnectionValues To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support tab, click the Details button. The Network settings are displayed. How to set up manually To enter the Network connection values manually, follow these steps: 1. Follow Steps 1 through 6 in the “How to set up using PBC (WPS)” (p. 31). 2. Press the Ў button to select Internet Protocol Setup, and then press the ENTERE button. Press the ^ or Ў button to select Manual, and then press the ENTEREbutton. 3. Press the Ў button to go to the first entry field (IP Address). 4. Use the number buttons to enter numbers. 5. When done with each field, use the > button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 6. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the ^ or Ў button to go to DNS. 8. Press the Ў button to go to the first DNS entry field. Enter the numbers as above. 9. When done, press the ^ button to go to Select a Network. Select your network, and then press the ENTEREbutton. 10. Go to Step 4 in the “How to set up automatically” (p. 32), and follow the directions from that point on. 04 Advanced Features English 33 Advanced Features SWL(Samsung Wireless Link) This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV. . To use the Internet@TV, the AP (access point) must be connected to the wireless network. . If a Samsung Wireless LAN Adapter is connected to the USB2 port, the network may not operate normally. We recommend to connecting it to the USB1(HDD) port. . Only sharers using the 2.4 Ghz band are supported. Sharers using the 5 Ghz band are not supported. SWL connect You can directly connect a device that supports the PBC (WPS) to the TV. . This function is available when SWL(Samsung WirelessLink)is set to On. How to connect Samsung Wireless Link For the procedures to establish a connection, refer to the following: 1. Follow Steps 1 through 5 in the “How to set up using PBC (WPS)” (p. 31). 2. Select SWL(Samsung Wireless Link) by using the Ў button and press the ENTERE button to turn it On. 3. Select SWL connect by using the Ў button and press the ENTEREbutton. 4. If the “Press the PBC button on the PBC(WPS) supported device to connect within 120 seconds.” message appears, press the PBC button on the device to connect. . For more information, refer to the wireless network setup manual of the device to be connected. 5. If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically. . If the connection fails, please retry after 2 minutes. IfYourTV Failsto Connecttothe Internet Your TV may not be able to connect t...

Эта инструкция также подходит к моделям:
Телевизоры - UE32C6700US (21.69 mb)
Телевизоры - UE32C6710US (21.69 mb)
Телевизоры - UE32C6730US (21.69 mb)
Телевизоры - UE32C6740SS (21.69 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории