Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. • You cannot use the play function when Plug & Play (initial setup) is in progress. . . English The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Search Anynet+ devices again. • You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. • If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected, please repeat the device scan. The TV Programme cannot be recorded. • Check whether the antenna jack on the recording device is properly connected. The TV sound is not output through the receiver. • Connect the optical cable between TV and the receiver. . . English . .. My Contents English .Using the Media Contents Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device. 1. Press the SMART HUB button. 2. Press the d or u button to select desired menu (Videos, Photos, Music), then press the ENTERE button. .The displayed menu may differ depending on the model. Search All Recommended Favourites ScheduleChannel Videos Source Photos Music Samsung Apps a Login b Sorting { Edit } Settings . Connecting a USB Device TV Rear Panel USB Drive .The displayed menu may differ depending on the 1. Turn on your TV. 2. Connect a USB device containing recorded tv, photo, music and/or movie files to the USB port on the back or side panel of the TV. 3. When USB is connected to the TV, popup model. window appears. Then you can select New .. device connected. English . Connecting to the PC through network You can play pictures, music and videos saved on your PC through a network connection in the SMART HUB mode. 1. For more information on how to configure your network, refer to “Setting the Network”. . You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. . . IP Address: 123.456.789.**) English 2. Using a LAN cable, connect between the external modem and the PC onto which the AllShare PC Software will be installed. . You can connect the TV to the PC directly without connecting it through a Sharer (Router). N Functions that are not supported when connecting to a PC through a network: . The BGM Mode and Background Music Setting functions. . Sorting files by preference in the Photos, Music and Videos folders. . . The .. (REW) or . (FF) button while a movie is playing. . N DivX DRM, Multi-audio, embedded captions are not supported. N AllShare PC Software should be permitted by the firewall programme on your PC. English N When you use SMART HUB mode through a network connection...
Эта инструкция также подходит к моделям:Телевизоры - UE27D5000NW (5.69 mb)
Телевизоры - UE32D5500RP (5.69 mb)
Телевизоры - UE32D5500RW (5.69 mb)
Телевизоры - UE32D5520RK (5.69 mb)