Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
N Depending on the device, this menu may not be available. Receiver Sound is played through the receiver. ► English □ Setting Up Anynet+ O MENum —— —— Anynet+ (HDMI-CEC) — ENTERS ■ Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off. N If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. N May not be enabled depending on the device. ► English A □ Switching between Anynet+ Devices 1. Press the TOOLS button, then select Anynet+ (HDMI-CEC). 2. Anynet+ devices connected to the TV are listed in Device List. N If you cannot find a device you want, press № T buttonto refresh the list. 3. Select a device and press the ENTERS button. You can switch to the selected device. N Only when you set Anynet+ (HDMI-CEC) to On in the System menu, the Device List menu appears. • Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. • If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. ► English A □ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. N If your receiver supports audio only, it may not appear in the device list. N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. N When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. ► English A N NOTE • You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. • The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. ► English □ Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one receiver (home theatre) can be connected. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable ► connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the System menu. English Problem Possible Solution Anynet+ does not work. < • Check whether the TV remote control is in TV mode...
Эта инструкция также подходит к моделям:Телевизоры - UA32D4000NW (2.78 mb)
Телевизоры - UA32D5000PW (2.78 mb)
Телевизоры - UA40D5000PW (2.78 mb)
Телевизоры - UA46D5000PW (2.78 mb)