|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Remote Control Sensor Aim the remote control towards this spot on the TV. Light Detecting Sensor Adjusts brightness of screen automatically by detecting brightness of surrounding environment. This sensor works when Brightness Sensor is on. Speakers English-5 Viewing the Connection Panel Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable. Power Input * LE26M5 [Rear Panel Jacks] Viewing the Connection Panel English-6 * LE32M5 / LE40M5 / LE46M5 Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable. [Rear Panel Jacks] [Side Panel Jacks] Viewing the Connection Panel Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: -An outdoor aerial -A cable television network -A satellite network Connecting Component Devices (DTV/DVD) -Connect component video cables to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. -If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set. -The Y, PB and PR connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. -Connect RCA audio cables to “R -AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. Connecting External A/V Devices -Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. -Connect RCA audio cables to “R -AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. -Headphone may be connected to the headphone output () on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled. SERVICE -Connector for engineer. Connecting Set-Top Box, VCR or DVD -Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD. -If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set. Input/Output Specification Connector Input Output Video Audio (R/L) S-Video RGB Video+Audio (R/L) SCART 1 (EXT 1) Only TV Out SCART 2 (EXT 2) Monitor Out (TV/Ext. 1/Ext. 2/AV/S-VHS) English-7 Viewing the Connection Panel Connecting HDMI/DVI -Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). -No sound connection is needed for an HDMI to HDMI connection. What is HDMI? - HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. - “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. -Use the HDMI/DVI terminal for DVI connection to an extended device. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R -AUDIO - L” terminal on DVI for sound output. Connecting Computer - Connect the D- Sub cable to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer. Connecting AUDIO - Connect RCA audio cables to “R -AUDIO - L” on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater. Speaker SCART2 Out & Audio Out RF Scart, AV, S-Video Component, PC, HDMI RF Scart, AV, S-Video Component, PC, HDMI Internal Mute Off Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output Internal Mute On Mute Mute Mute Sound Output Sound Output Sound Output Video No Signal Mute Mute Mute Mute Sound Output Sound Output Kensington Lock -Refer to “Using the Anti-Theft Kensington Lock” on page 63. -The place of the Kensington Lock may be different depending on its model. English-8 Viewing the Remote Control (All Functions Except Teletext) Television Standby button (Refer to page 13) Picture freeze (Refer to page 27) Number buttons for direct channel access DNIe Demo On/Off (Refer to page 29) Temporary sound switch-off (Refer to page 36) -Volume increase -Volume decrease (Refer to page 35) Sele...
Эта инструкция также подходит к моделям:Телевизоры - LE32M51B (10.25 mb)
Телевизоры - LE40M51B (10.25 mb)