Оценок - 4, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual. English - listening through a receiver You can listen to sound through a receiver instead of the tV speaker. . Press the anynet+ button. Press the ^ or Ў button to select receiver, then press theEntEr/oK button. . Press the < or > button to select to on, then press theEntEr/oK button. Now you can listen to sound through the receiver. 3. Press the Exit button to exit. . When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. . If the receiver is exclusively for a home theater only (supporting audio only), it may not appear in the device list. . In case of a content with copyright problem, listening through the receiver may not properly operate. . When listening through the receiver, there are restrictions for using the PIP and audio-related menu. Check Points before requesting Service Entermove View tV Select device . record . menu on device . device operation . receiver :on . Setup . air 8 Symptom Solution anynet+ does not work. i want to start anynet+. i want to exit anynet+. the Connecting to anynet+ device… message appears onthe screen. the anynet+ device does not play. the connected device is not displayed. the tV program cannot be recorded. ¦ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ¦ Connect only one receiver. ¦ Check if the Anynet+ device power cord is properly connected. ¦ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. ¦ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ¦ Check whether the TV remote control is in TV mode. ¦ Check whether it is Anynet+ exclusive remote control. ¦ Anynet+ doesn’t work at a certain condition. (Searching channels) ¦ When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or restart your TV. ¦ Check if the Anynet+ Function of Anynet+ device is set on. ¦ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ¦ Press the tV button on the TV remote control to switch to TV. Then press the Anynet+ button to show the anynet+ menu and select a menu you want. ¦ Select View tV in Anynet+ menu. ¦ Press the SourCE button on the TV remote control and select a device other than Anynet+ devices. ¦ Press any of Ch, Ch liSt, PrE-Ch, and such to change to theTV mode. (Note that the channel button operates only when a tuner-embeddedAnynet+ device is not connected.) ¦ You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. ¦ Use the remote control when the Anynet+ setting or switching to view mode is complete. You cannot use the play function when Plug & Play is in progress. ¦ Check whether or not the device supports Anynet+ functions. ¦ Check whether or not the HDMI 1.3 cable is properly connected. ¦ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ¦ Search Anynet+ devices again. ¦ You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions. Check whether the antenna jack on the recording device is properly connected. English - Wall-mount adjustment (la 0r8, la 0m8, la 6m8, la m8)(Sold separately) once the wall mount is installed, the position of your tV can be easily adjustable. tV rear Panel auto Wall-mount Serial Cable( P to P)(not supplied) Entering the menu . Press the mEnu button to display the menu. Press the ^ or Ў button to select “Setup”, then press the EntEr/oK button. . Press the ^ or Ў buttons to select “Wall-Mount Adjustment”, then press the EntEr/oK button. 3. Adjust to the desired position using the ^,Ў,<,> buttons Press the Exit button to exit. tV Setup rmore Wall-mount adjustment . Energy Saving : off . hdmi black level : off . PiP . move Enter return Wall mount adjusment Position adjust Center ExitinFo Position 3 If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears. When you turn the power off, your TV moves to the initial installation position. When you turn the power on, your TV moves to the last remembered position you adjusted. button operations Wall-mount angle adjustment Tilt Up, Tilt Down, Move right, Move left Reset Moves to the initial installation position Remembering the position and moving to the remembered position Remembers 3 positions with the Red, Green and Yellow buttons. Moves to the remembered position using these 3 color buttons. For installation, refer to the Installation Manual provided. For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company. This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest de...
Эта инструкция также подходит к моделям:Телевизоры - LA32R81B (3.95 mb)
Телевизоры - LA32R81W (3.95 mb)
Телевизоры - LA32R88BX/HAC (3.95 mb)
Телевизоры - LA37R81B (3.95 mb)