Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 ( i.e. marked with ASAT or ) must be used. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. FUSE How to replace the Fuse Open the fuse compartment with a blade screwdriver, and replace the fuse. • IMPORTANT If the plug supplied is not suitable for the socket outlet in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Do not connect either wire to the earth terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green and yellow. WARNING • To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. This plug cannot be used and should be destroyed. • To prevent fire or shock hazard, do not expose the unit to rain or moisture. • Dangerously high voltages are present inside the set. Do not open the cabinet. Refer servicing to qualified personnel only. Table of Contents Table of Contents Getting Started Checking the accessories supplied 2 Inserting batteries into the remote control 2 Connecting the speakers 3 Connecting the aerial 5 Switching on the TV 5 Automatically tuning the TV 6 Overview Overview of the TV set buttons Overview of the remote control buttons 7 8 Additional TV Features Choosing a language for the TV menu screens 9 Automatically tuning the TV 10 Re-arranging the TV channels 11 Adjusting the picture 12 Changing picture and sound modes quickly 12 Adjusting the sound 13 Setting up Dolby Pro Logic 14 Changing the screen mode 15 Using the further programme preset feature 16 Adjusting the picture rotation 17 Using the parental lock 17 Using the sleep timer 18 Manually tuning the TV 19 Skipping programme positions 20 Naming a channel 21 Teletext Switching teletext on and off Using other teletext functions 22 22 Optional Equipment Connecting equipment to the TV 23 Additional information when connecting equipment to the TV 23 Selecting the output source for the scart socket G 24 Using the ‘AV Label Preset’ feature 25 Additional Information Specifications Troubleshooting 26 27 Getting Started Follow steps 1-6 to: Check the accessories supplied Insert batteries into your remote control Connect the speakers Connect the aerial to your TV Plug in and switch on the TV View programmes on your TV 1. Checking the accessories supplied Surround speakers Centre speaker Batteries Remote control 2. Inserting batteries into the remote control Always remember to dispose of used batteries in an environmentally friendly way. Getting Started 3.1. Connecting the speakers Before switching on the TV, please connect the speakers to the TV using the leads provided. Connect the striped lead to the red terminals and the black lead to the black terminals. Dolby* ProLogic Surround normally requires 5 speakers: Centre Speaker -to anchor the fixed sounds, like dialogues, to the screen. Left and Right Front Speakers (incorporated in the TV) -for the normal two channel stereo or bilingual broadcasts. Surround Speakers - for the special effects created by the surround channels. To connect the speakers provided: L/G/ S/I R/D/ D/D CSS L/G/ S/IR/D/ D/DCSS Yoursittingposition Connect striped leads to red terminals Connect black leads to black terminals Centre speaker Black lead Striped lead Surround speakers ** * Manufactured under licence from Dolby Laboratories Licensing Corporation. ‘Dolby’, ‘ProLogic’, and the double D symbol are trademarks of the Dolby Laboratories Licensing Corporation. ** For the best sound effects, place the surround speakers one meter above your listening position. Getting Started 3.2. Connecting the speakers To connect your own speakers (when using your own speakers, make sure they are at least 4 ohms impedance and magnetically shielded) L/G/ S/I R/D/ D/D CSS L/G/ S/I/D/ / CSS Yoursittingposition Centre speaker Right speaker Left speaker Connect black leads to black terminals Connect striped leads to red terminals Black lead Striped lead Surround speakers Note: When you connect your own external l...