Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
In this way a connected VCR records the unscrambled signal. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the v button to select the symbol on the menu screen then press the b button to enter the ‘PRESET’ menu. 3. Press the v button to select ‘Further Programme Preset’ then press the b button to enter the ‘FURTHER PROGRAMME PRESET’ menu. 0 1 2 3 4 5 6 7 8 9 PROG Off Off AV1 Off AV2 Off Off Off Off Off DECODER On On On On On On On On On On AFT FURTHER PROGRAMME PRESET 4. Press the V or v buttons to select the relevant programme number then press the b button repeatedly to select a) AFT or b) DECODER. The selected item changes colour. Note: AFT will only be available on analoge channels. 5. a) AFT Press the V or v buttons to fine tune the channel frequency over a range of -15 to +15. Press the OK button to confirm. Repeat steps 4 and 5a if you wish to fine tune other channels. b) DECODER Press the V or v buttons to select AV1, AV2 or AV3 for the programme position and press the OK button to confirm. You can now attach a decoder to the AV1, AV2 or the AV3 socket on the back of the TV and the picture from that decoder will appear on this programme number. Repeat steps 4 and 5b to preset the AV output for other programme positions. FURTHER PROGRAMME PRESET PROG AFT DECODER 0 On Off 1 On Off 2 On AV1 3 On Off 4 On AV2 5 On Off 6 10 Off 7 On Off 8 On Off 9 On Off 6. Press the MENU button to remove the menu from the TV screen. Additional TV Features Adjusting the picture rotation If, due to the earth’s magnetic field, the picture slants, you can use this feature to readjust the picture. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the v button to select the symbol on the menu screen then press the b button to enter the ‘PRESET’ menu. 3. Press the v button to select ‘Picture Rotation’ then press the b button to highlight the 0 (zero) on the right of the menu. 4. Press the b or B buttons to adjust the picture rotation. The adjusting range is -5 to +5. 5. Press the OK button to store the new range. 6. Press the MENU button to remove the menu from the TV screen. Additional TV Features Using the parental lock This feature enables you to prevent undesirable broadcasts appearing on the TV. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the v button on the remote control to select the symbol on the menu screen then press the b button to enter the ‘PRESET’ menu. 3. Press the v button to select ‘Parental Lock’ then press the b button to enter the ‘PARENTAL LOCK’ menu. 4. Press the v button to select the channel you wish to block then press the OK button to confirm your selection. The symbol appears before the programme position to indicate this channel is now blocked. To unblock the channel, press the OK button again. The symbol disappears. 5. Repeat step 4 if you wish to block other channels. 6. Press the MENU button to remove the menu from the TV screen. Additional TV Features Using the sleep timer The TV can be set to switch automatically to standby mode after a length of time chosen by you. You may set the time in 30 minute steps up to 4 hours. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the v button on the remote control to select the symbol on the TV screen then press the b button twice. 3. Press the b or B buttons repeatedly until the required amount of time delay appears on the screen. Sleep Timer Off TIMER Sleep Timer 1:00 TIMER 4. Once the time delay has been selected, press the OK button to enter. 5. Press the MENU button to remove the menu from the TV screen. One minute before standby, the display shown appears on the screen. 0:01 Notes:When watching TV, press the button if you wish to see the time remaining. To return to normal operation from standby mode, press the button. / Additional TV Features Manually tuning the TV You have already tuned the TV automatically using the instructions at the start of this manual. You can however carry out this operation manually, adding channels to the TV, one at a time. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the v button to select the symbol on the TV screen then press the b button to enter the PRESET menu. 3. Press the v button to select ‘Manual Programme Preset’ on the menu screen then press the b button to enter the ‘MANUAL PROGRAMME PRESET’ menu. 4. Press the V or v buttons to select an unused programme number for your channel then press the b button to enter. 03 5. Press the V or v buttons to select the TV broadcast system (I for analogue or DIG for digital) or a video input source (AV1, AV2 ...) then press the b button to confirm. 6. Select the first number digit of ‘CHAN’ (channel) then the second number digit of ‘CHAN’ with the number buttons on the remote control or Press the V or v buttons to search for the next available...
Эта инструкция также подходит к моделям:Телевизоры - KV-32DS20U (2.36 mb)