Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
No.: Image number or file name isdisplayed. Date: Date of recording is displayed. Pixel: Display resolution is displayed. Total number of images Navigation area (to Slide show) Present status (While reading the data) (to Single photo display) ¦Press to exit from Depending on the JPEG format, “Information” contents may not be displayed a menu screen correctly. Refer to p. 43 (Data format for SD card browsing) for details. View Rotate 90 degrees (counter-clockwise) ¦Press to return to the previous Slide showR YG B Next Rotate Prev. RETURN Displays one at a time Navigation area To next photo screen Rotate 90 degrees (clockwise) To previous photo To display/hide Navigation area Insert the card Remove the card Press in lightly on SD Card, then release. Compliant card type (maximum capacity): SDHC Card (16 GB), SD Card (2 GB), miniSD Card (1 GB) (requiring miniSD Card adapter) For cautions and details on SD Cards (p. 43) Insert the card Remove the card Press in lightly on SD Card, then release. Compliant card type (maximum capacity): SDHC Card (16 GB), SD Card (2 GB), miniSD Card (1 GB) (requiring miniSD Card adapter) For cautions and details on SD Cards (p. 43) To change the view (slide show mode, adjusting images, etc.) Viewing Viewing ¦To set up the slide show mode In 1 1 or Display “Photo menu” 2 2 Select “Setup slide show” Photo menu Picture Setup slide show select “Setup slide show” ok 3 3 Select the item and adjust Setup slide show Disp. time Repeat 5 On Select Adjust You can set how many seconds each image is displayed in Slide show mode. (1-10/15/20/30/45/60/120 sec) Turn the slide show Repeat function On or Off. Note For large image sizes, the display time will be longer than the number of seconds set. To stop in mid-cycle Press Disp. time Repeat ¦To adjust picture In 1 1 or Display “Photo menu” 2 2 Select “picture” Photo menu Picture Setup slide show select “Picture” ok 3 3 Select the item Picture 1/2 Picture mode Picture Reset Brightness Vivid 0 0 select Picture menu (p. 24) 4 4 Adjust or select Picture 1/2 Picture mode Picture Reset Brightness Vivid 0 0 Adjust or Select Watching Videos and DVDs If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV’s screen. Input Select You can select the external equipment to access. With the connected equipment turned On Display the Input select menu ¦To return to TV Select the input mode Input select 2 3 4 5 TV Component 1 Component 2 HDMI 1 HDMI 2 GAME AUX 7 Video 1 6 HDMI 3 8 Video 2 GAME GAME 1 9 PC or select enter (example) HDMI 1 GAME Terminal Label (example) Note p. 37. Note Press corresponding NUMBER button on the remote control to select the input of your choice. Select the input of your choice, then press OK. During the selection, if no action is taken for several seconds, the “Input select” menu disappears. The terminal and label of the connected equipment are displayed. To label each of the input, please refer to p. 37. The input label will be displayed on “Input select” screen if Input label is set on p. 37. For front input terminals (HDMI 3/Video 2), “GAME” input label is set as default. (Picture mode is set to “Game”, refer to p. 44.) For more details for picture mode setting, refer to p. 44. For Input label, refer to Operate the connected equipment using the remotecontrol supplied with the equipment. For details, see the manual for the connected equipment. Watching VIERA LinkTM Setting If you connect equipment that has “HDAVI Control” function to a TV with HDMI cable, you can use more convenient functions. Please refer to p. 28-31. Before using these functions, you need to set “VIERA Link” setting to “On” as shown below. ¦Press to exit from a menu screen ¦Press to return to the previous screen Display menu Select “Setup” Menu VIERA Link Lock Setup SD card CC select next Select “VIERA Link setting” Setup 2/2 VIERA Link setting Advanced setup select next Select “VIERA Link” VIERA Link setting VIERA Link Power off link Power on link Default speakers On Set Set TV select Select “On” (default is On) change Now you can set each “VIERA Link” function according to your preference (p. 28-31) Note If no HDMI equipment is connected or standard HDMI equipment (non- “VIERA Link”) is used, set it to “Off”. For the details on the external equipment’s connections, please refer to the operating manuals for the equipment. VIERA LinkTM Setting If you connect equipment that has “HDAVI Control” function to a TV with HDMI cable, you can use more convenient functions. Please refer to p. 28-31. Before using these functions, you need to set “VIERA Link” setting to “On” as shown below. ¦Press to exit from a menu screen ¦Press to return to the previous screen Display menu Select “Setup” Menu VIERA Link Lock Setup SD card CC select next Select “VIERA Link setting” Setup 2/2 VIERA Link setting Advanced setup select next Select “VIERA Link” VIERA Link setting VIERA Link Power off link Power on link Default speakers On Set Set TV select Sel...
Эта инструкция также подходит к моделям:Телевизоры - TH-C50FD18 (2.52 mb)