Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
You can be completely enveloped in sound; just as if you were at a concert hall or cinema. SDI Sound Output 30 INPUT MENU -/ VOL +/ ENTER/ VOL button Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). Press to exit from the Digital Zoom. Notes: • When power goes OFF (including “Off Timer” operation), Digital Zoom terminates. • The Digital Zoom function cannot be selected while in the following operation state: “Multi-viewer” (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 24) When MULTI DISPLAY SETUP is ON (see page 37). When PORTRAIT SETUP is ON (see page 40). When SCREENSAVER (WHITE BAR SCROLL) is running (see page 33) • While Digital Zoom is in operation, “Adjusting POS. /SIZE” cannot be used. Select the magnifi cation required for the enlarged display. Each time this is pressed, the magnifi cation factor changes. This is shown in the image being displayed. 3 2 4 The cursor will move. 2 EXIT 2 1 EXIT 1 Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. During Digital Zoom, only the following buttons can be operated. [Remote control] [Unit] . 1 . 2 . 3 . 4 VOL button MUTE button SURROUND button OFF TIMER button POSITION / ACTION button 31 PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. Press to display the SET UP menu. Press to select SET UP TIMER or PRESENT TIME SETUP. Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen. 1 2 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP SET UP 2/2 SET UP TIMER PORTRAIT SETUP PRESENT TIME SETUP SCREENSAVER MULTI DISPLAY SETUP 99:99 MON PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET PRESENT TIME OF DAY DAY 10:00 TUE PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET PRESENT TIME OF DAY DAY Display the PRESENT TIME SETUP screen. To set up DAY and PRESENT TIME OF DAY, follow the procedure described below. Press to select DAY or PRESENT TIME OF DAY. Press to set up DAY or PRESENT TIME OF DAY. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute. • Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes. Press to select SET. Press to store PRESENT TIME SETUP. Notes: • SET cannot be selected unless PRESENT TIME OF DAY is set. • Unless setting the present time other than “99:99”, DAY setting is invalid. Press to exit from PRESENT TIME SETUP. 1 2 3 32 PRESENT TIME SETUP / SET UP TIMER SET UP TIMER Press to select POWER ON TIME / POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes POWER ON TIME / POWER OFF TIME 1 minute. • Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF TIME by 15 minutes. Press to select POWER ON FUNCTION / POWER OFF FUNCTION. Press to select ON. Press twice to exit from SET UP. Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. Display the SET UP TIMER SCREEN. 1 2 3 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER OFF TIME POWER ON TIME POWER ON FUNCTION OFF OFF PRESENT TIME OF DAY 99:99 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER OFF TIME POWER ON TIME POWER ON FUNCTION OFF OFF PRESENT TIME OF DAY 99:99 33 Do not display a still picture, especially in NORMAL mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. NEGATIVE / SCROLL selection 2 3 1 4 Press to display the SET UP menu. Press to select the SCREENSAVER. Press to select the SCREENSAVER screen. Press to select the FUNCTION. Press to select the desired function. WHITE BAR SCROLL NEGATIVE WHITE BAR SCROLL : A white bar will scroll from left to right. NEGATIVE : A negative image will be displayed on the screen. MODE selection 5 START setting When the MODE is set to ON, press to select START. Press to start SCREENSAVER. The menu screen will disappear and the SCREENSAVER will be activated. To stop the SCREENSAVER under ON, press the R button or any buttons on the main unit. Note: When the display is turned off, the SCREENSAVER will be deactivated. Press to select the MODE. Press to select each mode items. OFF INTERVAL : Operates when SHOW DURATION and SAVER DURATION are set up and those times arrive. TIME OF DAY : Operates when START TIME and FINISH TIME are set up and those times arrive. ON : Operates when START is selected and the ACTION ( ) button is pressed. SCREENSAVER (For preventing image retention) SET UP 2/2 SCREENSAVER MULTI DISPLAY SETUP SET UP TIMER PORTRAIT SETUP PRESENT TIME...
Эта инструкция также подходит к моделям:Телевизоры - TH-50PF10UK (5.66 mb)