Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Panasonic, модель TH-37PWD7UY

Производитель: Panasonic
Размер: 1.37 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


ADVANCED SETTINGS Item Effect Details BLACK EXTENSION Less More Adjusts the dark shades of the image in gradiation. INPUT LEVEL Less More Adjustment of parts which are extremely bright and hard to see. (This cannot be adjusted when the input signal is DVI.) W/B HIGH R Less More Adjusts the white balance for light red areas. W/B HIGH B Less More Adjusts the white balance for light blue areas. W/B LOW R Less More Adjusts the white balance for dark red areas. W/B LOW B Less More Adjusts the white balance for dark blue areas. GAMMA Down Up S CURVE 2.0 2.2 2.5 AGC OFF ON Increases the brightness of dark signal automatically. Notes: • Carry out “W/B” adjustment as follows. 1. Adjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings. 2. Adjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings. 3. Repeat steps 1 and 2 to adjust. Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment. • The adjustment values are memorized separately for each input mode (INPUT1, INPUT2 , INPUT3 and PC IN). • The adjustment range values should be used as an adjustment reference. Helpful Hint ( N / NORMALIZE Normalization) On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. SOUND Adjustment SOUND Press to display the SOUND menu. Select to adjust each item. Press to select the menu to adjust. Select the desired level by listening to the sound. PLASMA DISPLAY N R INPUT VOL PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMERPC MULTI PIP SWAP SELECT MOVE SURROUND ZOOM 0 0 0 SOUND NORMALNORMALIZE STANDARD OFF TREBLE AUDIO MENU BALANCE BASS SURROUND BASS Adjusts low sounds TREBLE Adjusts high sounds BALANCE Adjusts left and right volumes SURROUND AUTO STANDARD Emits the original sound. Automatically controls proper volume level. Select ON or OFF Notes: • Press the SURROUND button to directly turn the surround effect ON and OFF. (see page 15) • BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU (STANDARD, AUTO). While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( N / NORMALIZE Normalization) MUTE Useful when answering the phone or receiving unexpected visitors. Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. Digital Zoom This displays an enlargement of the designated part of the displayed image. ZOOM MOVE EXIT 1 INPUT MENU ENTER– +VOL 1 Display the “Operation Guide”. Press to access Digital Zoom. The “Operation Guide” will be displayed. SURROUND button MUTE button VOL button OFF TIMER button During Digital Zoom, only the following buttons can be operated. [Remote control] VOL button MULTI PIP SWAP SELECT MOVE ZOOM N R SOUND INPUT VOL PICTURE SET UP ASPECT PICTURE POS. /SIZE PC SURROUND OFF TIMER [Unit] Digital Zoom This displays an enlargement of the designated part of the displayed image. ZOOM MOVE EXIT 1 INPUT MENU ENTER– +VOL 1 Display the “Operation Guide”. Press to access Digital Zoom. The “Operation Guide” will be displayed. SURROUND button MUTE button VOL button OFF TIMER button During Digital Zoom, only the following buttons can be operated. [Remote control] VOL button MULTI PIP SWAP SELECT MOVE ZOOM N R SOUND INPUT VOL PICTURE SET UP ASPECT PICTURE POS. /SIZE PC SURROUND OFF TIMER [Unit] Select the area of the image to be enlarged. Press on the enlargement location to select. The cursor will move. EXIT 2 Select the magnification required for the enlarged display. Each time this is pressed, the magnification factor changes. This is shown in the image being displayed. . 1 . 2 . 4 . 3 Return to normal display (quit Digital Zoom). R Press to exit from the Digital Zoom. Notes: • When power goes OFF (including “Off Timer” operation), Digital Zoom terminates. • The Digital Zoom function cannot be selected while in the following operation states: “Multi-screen” (MULTI DISPLAY).(see page 32) “Multi-viewer” (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 21) • While Digital Zoom is in operation, “Adjusting PICTURE POSITION/SIZE” cannot be used. • The Digital Zoom capability is functional for the following component signals: 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i • The Digital Zoom capability is functional for the following composite signals: NTSC, PAL, SECAM PRESENT TIME SETUP / SET UP TIMER The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confirm the PRESENT TI...

Эта инструкция также подходит к моделям:
Телевизоры - TH-42PHD7UY (1.37 mb)
Телевизоры - TH-50PHD7UY (1.37 mb)
Телевизоры - TH-42PWD7UY (1.37 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории