Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Under main Picture and sub picture display, select the picture which you would like to change input modes. PC1VIDEO1A B Input modes switching is possible Main picture label is changed Sub picture label is changed INPUT ZOOM MOVE Press to change input signal. VIDEO2 VIDEO1 PC1 VIDEO3AC B D Picture is changed Press to move the sub picture. Each time the location of the sub picture will be moved. Notes: • This button is effective only in the picture in picture. • The sub picture may be hidden by the on screen display, depending on its position. Notes: • Sound output is from the main picture. • In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. • This function is not available between the following input signals: PC input (D-sub) RCA Component Video input from TY-42TM6Z (Optional) • The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. • Due to the small dimensions of the sub pictures used for the picture in picture and picture out picture displays, these sub pictures cannot be shown in detail. •Two computer screen pictures are displayed in a simplified format, and it may not be possible to discern details on them satisfactorily. PICTURE Adjustments 1 1 PICTURE Press to display the PICTURE menu. 2 Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Select to adjust each item. MULTI PIP SWAP SELECT MOVE ZOOM SURROUND VOL N R SOUND SET UP ASPECT PICTURE POS. /SIZE INPUT PICTURE 2/2 ADVANCED SETTINGS COLOR TEMP COLOR MANAGEMENT NORMAL OFF ON PICTURE 1/2 25 0 0 0 3 PICTURE NORMALNORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( N / NORMALIZE Normalization) AUTO STANDARD CINEMA DYNAMIC Press the left or right button to switch between modes. STANDARD For viewing in standard (evening lighting) environments. This menu selects the normal levels of BRIGHTNESS and PICTURE. DYNAMIC For viewing in brighter environments. This menu selects higher than normal levels of BRIGHTNESS and PICTURE. CINEMA Ideal for movies. Note: If you would like to change the picture and color of the selected PICTURE menu to something else, adjust using the items in the PICTURE menu. (see next page) AUTO Automatically selects the mode that best suits the brightness of the environment. ADVANCED SETTINGS ON Enables fine picture adjustment at a professional level (see next page). ADVANCED SETTINGS OFF Displays images with settings of the PICTURE menu. Press to select “ON”. Press to enter Advanced Settings. 0 0 0 0 0 0 2.2 W/B LOW B BLACK EXTENSION W/B HIGH B W/B LOW R AGC GAMMA INPUT LEVEL W/B HIGH R ADVANCED SETTINGS NORMALNORMALIZE OFF COLOR MANAGEMENT ON Enables vivid colour adjustment automatically. NORMAL COOL WARM Press the left or right button to switch between modes. PICTURE Adjustments Item Effect Adjustments PICTURE Less More Adjusts the proper picture contrast. BRIGHTNESS Darker Brighter Adjusts for easier viewing of dark pictures such as night scenes and black hair. COLOR Less More Adjusts color saturation. TINT Reddish Greenish Adjust for natural flesh tones. SHARPNESS Less More Adjusts picture sharpness. Notes: • “COLOR” and “TINT” settings cannot be adjusted for “RGB/PC” and “DVI” input signal. •You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each PICTURE MENU. • The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input mode (INPUT1, INPUT2 , INPUT3 and PC IN). • The “TINT” setting can be adjusted for NTSC signal only during “VIDEO (S VIDEO)” input signal. • In PICTURE, there is nor a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture. ADVANCED SETTINGS Item Effect Details BLACK EXTENSION Less More Adjusts the dark shades of the image in gradiation. INPUT LEVEL Less More Adjustment of parts which are extremely bright and hard to see. (This cannot be adjusted when the input signal is DVI.) W/B HIGH R Less More Adjusts the white balance for light red areas. W/B HIGH B Less More Adjusts the white balance for light blue areas. W/B LOW R Less More Adjusts the white balance for dark red areas. W/B LOW B Less More Adjusts the white balance for dark blue areas. GAMMA Down Up S CURVE 2.0 2.2 2.5 AGC OFF ON Increases the brightness of dark signal automatically. Notes: • Carry out “W/B” adjustment as follows. 1. Adjust the white balance of the bright sections using the “W/B HIGH R” and “W/B H...
Эта инструкция также подходит к моделям:Телевизоры - TH-50PHD7UX (1.27 mb)
Телевизоры - TH-42PWD7UX (1.27 mb)