Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
MENU ADJUST PICTURE AUDIO SET UP PICTURE ADJUST POSITION / SIZE AUDIO ADJUST POSITION/SIZE NORMAL POSITION NORMALIZE SIZE 15 RETURN 2 For “ZOOM” mode (see page 24) • POSITION CH CH VOL VOL O K Press to move the picture up or down. • Press OK to return to the factory default setting. • SIZE ZOOM Press to shrink the picture vertically [by 15 steps: 15 (original setting) down to 1]. • Press OK to return to the factory default setting. ZOOM AUDIO ADJUST Press the MENU button to display the MENU screen and select ADJUST. CH CH VOL VOL O K CH VOL VOL Press to select AUDIO ADJUST. Press to display the AUDIO ADJUST screen. Press to select the sub-menu. Select the setting while listening to the sound. Press to activate the setting if necessary. NORMAL / NORMALIZE Select “NORMALIZE” and press “OK” to return each MODE to the factory default setting. Notes: • “NORMAL” means the MODE is at the factory default setting. “NORMAL” changes to “NORMALIZE” when you change the setting of BASS, TREBLE, BALANCE, AI SOUND, SURROUND or AUDIO LEVELER. • You can normalize each MODE separately. AUDIO ADJUST NORMAL 5 + 3 0 STANDARD PAGE 1/2 MODE BASS TREBLE BALANCE AI SOUND SURROUND STEREO SAP MONO OFF ON OFF ON MENU ADJUST PICTURE AUDIO SET UP PICTURE ADJUST POSITION / SIZE AUDIO ADJUST AUDIO ADJUST PAGE 2/2 NORMAL 0AUDIO LEVELER MODE STANDARD Emits the original sound. DYNAMIC Gives contrast to sound. SPEECH Make voice sound clear. BASS, TREBLE, BALANCE, AI SOUND, SURROUND You can change the level of each sub-menu (BASS, TREBLE, BALANCE, AI SOUND, SURROUND) for each MODE (STANDARD, DYNAMIC and SPEECH) according to your personal preference. BASS Adjusts low frequencies. TREBLE Adjusts high frequencies. BALANCE Adjusts left and right volume. AI SOUND Automatically adjusts sound quality when ON is selected. SURROUND To enjoy a concert hall effect, select ON when stereo is playing. STEREO / SAP / MONO • Red display : With signal White display : No signal White display (All modes) : MONO • To change the mode using SAP button (see page 11). STEREO Two channel Audio reception. SAP Second Audio Programming ( typically used for bilingual audio ). MONO Select when stereo signal is weak. AUDIO LEVELER You can adjust the volume level for each of the input modes (TV, VIDEO1, VIDEO2 and COMPONENT). ASPECT Controls This feature allows you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Each time you press the button: Notes: • This feature does not work for 1080i and 720p input signals. • The aspect setting is stored separately for TV, VIDEO1, VIDEO2 and COMPONENT. JUST ZOOM FULL NORMAL ASPECT TV/VCR PLAY R-TUNE PROG STOP T V PAUSE REC FFREW VCR/DBS CH 0 ASPECT TV/VCR Mode NORMAL Picture NORMAL 4 3 NORMAL mode will display a 4:3 picture at its standard 4:3 size without any stretching. Explanation JUST 4 3 JUST JUST mode will display a 4:3 picture at its maximum size but with aspect correction applied to the sides of the screen so that elongation is only apparent at the left and right edges of the screen. The size of the picture will depend on the original signal. ZOOM 4 3 ZOOM ZOOM mode magnifies the central section of the picture. FULL 4 3 FULL FULL will display the picture at its maximum size but with slight elongation. Operating peripheral equipment using the remote control Programming the remote control code You can operate other manufacturers’ components using this TV’s remote control. Preparations: • Connect the plug of the external component to the wall outlet. • Make sure the component is turned off. RETURN EXITMENU PLAY R-TUNE SLEEP PROG GUIDERECALL MUTETV/VIDEO STOP T V PAUSE REC FFREW ASPECT TV/VCR VCR/DBS CH SAP CH O K CH VOL VOL POWER VCR DVD DBS/CBL TV 1 2 3 4 5 6 7 8 0 9 POWER 1 Press and hold POWER and+ CH CH VOL VOL O K OK together, for at least 5 seconds. • The mode selection buttons flash, then release POWER and OK. 2 2 VCR DVD DBS/CBL TV Select the type of the component. • The selected button lights and all others go out. 3 3 1 2 3 4 5 6 7 8 0 9 Enter the 3-digit infrared code (see pages 26, 27). • Factory default setting: Panasonic • Press POWER to test the operation. Notes: • If the component does not operate with the remote control, repeat the procedure using another code. (Some brands have multiple codes). • If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail. To find a code not listed in the index After step 2 above, Press to select the code. • The potential code is loaded for the device selected in step 2. • Press POWER button to test the operation. • Repeat the steps until the component code is found. It may take many attempts before the correct code is found. Press to store the code. Operating peripheral equipment using the remote control Infrared Code Index The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available...
Эта инструкция также подходит к моделям:Телевизоры - TC23LX50 (1.41 mb)
Телевизоры - TC19LE50 (1.41 mb)
Телевизоры - TC23LE50 (1.41 mb)