Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY. Polarized plug Non-Polarized plug Cable / Antenna For proper reception, either a cable or antenna connection is required. Cable Connection Connect the cable supplied by your local cable company. Note: A cable converter box may be required for proper reception. Check with your Incoming Cable from Cable Company 75 Ohm VHF/UHF on back of TV local cable company for compatibility requirements. Installation Antenna Connection • For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. • Antenna Mode must be set to TV. Incoming Cable from Home Antenna \s I v — Preset Cable Mode is preset at the factory. Antenna users must change to TV Mode in the SETUP Menu. Optional Equipment Connections VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video input connection. (See your equipment manual) TERMINALS ON BACK OF TV (may vary) VCR Note: CABLES NOT SUPPLIED If S-VIDEO and VIDEO input are used at the same time, two images will appear on the TV screen. Procedure 1. Connect equipment as shown to rear Audio/Video input jacks. 2. Select the Video mode by pressing TV/VIDEO button. 3. Operate optional equipment as instructed in equipment manual. 5 Main Menu TO AUDIO AMPIifier (SP3233/U only) Connect to an external audio amplifier input for listening to a stereo system. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Audio Adjustments 1. Select TV SPEAKERS ON located in the AUDIO menu. 2. Set amplifier volume to minimum. 3. Adjust TV volume to desired level. 4. Adjust amplifier volume to match the TV. 5. Select TV Speakers OFF&VAO from AUDIO menu. 6. Volume and mute are now controlled from the TV. Note: In OFF&FAO the volume is controlled by the external amplifier. Main Menu Main Menu ACTION Button CH/VOL Buttons Press the ACTION button to display the Main Menu and submenus. Press the ACTION button repeatedly to exit. Remote Navigation Buttons CH CH Press the CH (channel) or VOL (volume) buttons to select an icon. Use the CH buttons to highlight the desired features. Use VOL buttons to select and adjust features. 6 Picture In Picture (PIP) Operation Picture in Picture (PiP) Operation PIP Operation with a VCR and Cable Box (SP3233/U Only) This television includes a Picture In Picture (PIP) feature. A second video source (VCR, Camcorder, etc.) is required to provide a second picture. Connect your television to a VCR and Cable Box, as shown. SP2723/U has only one video input). VCR CABLE BOX 1E TERMINALS ON BACK OF TV _ _(may_vai^) _ _ _ 0@№0 Incoming Cable Cable Splitter (Not Supplied) CABLES NOT SUPPLIED Note: The remote control must be programmed with supplied codes to operate the VCR and Cable Box. See Programming the Remote Control in the Remote Control Quick Reference Guide. Procedure Press the PIP button on the remote control to display the PIP frame. Note: The PIP picture is the same as the main picture, initially. To view a different picture in the PIP frame: • Press the TV A/I DEO button on the remote control to select the video PIP source. • Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3. • Choose channels for the PIP frame by pressing the CABLE button on the remote control and using the numeric keypad or CH up/down buttons. • Choose channels for the Main Picture by pressing the TV button on the remote control and using the numeric keypad or CH up/down buttons. ¿I'/ 2: SWAP Button The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status. Picture In Picture (PIP) Operation_ PIP Operation with a VCR - No Cable Box (SP3233/U Only) This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second picture. Connect your television to a VCR, as shown. SP2723/U has only one video input.) Incoming Cable CABLES NOT SUPPLIED Note: The remote control must be programmed with the supplied codes to operate the VCR. See Programming the Remote Control in the Remote Control Quick Reference Guide. Procedure Turn the VCR OFF and tune TV to channel 3. Press the PIP button on the remote control to display the PIP frame on screen. Note: The PIP picture is the same as the Main picture, initially. • Press the TV/VIDEO button on the remote control to select the VIDEO PIP source. • Press the VCR button on the remote control and turn ON the VCR. • Press the TV/VCR button on the remote control. • Choose channels for PIP frame by pressing VCR CHANNEL up/down buttons on the remote control. • Choose channels for the Main Picture by pressing the TV button on the remote control and using the numeric keypa...
Эта инструкция также подходит к моделям:Телевизоры - SP3233 (969.18 kb)
Телевизоры - SP2723 (969.18 kb)
Телевизоры - SP3233 (969.18 kb)