Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Use with any other type of optional accessories may cause instability which could result in the possibility of injury. • Manufactured by Matsushita Electric Industrial Co., Ltd. Pedestal • Manufactured by Matsushita Electric Industrial Co., Ltd. Wall stand • Manufactured by Matsushita Electric Industrial Co., Ltd. Wall-hanging bracket (angled) Always be sure to ask a qualified technician to carry out set-up. When using the Wide Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Wide Plasma Display. • Top of Wide Plasma Display is usually very hot due to high temperature exhaust air from ventilation holes. Burns or personal injuries can happen if any body parts brought too close. Placing any object near the top of the display could also result in heat damages to the object as well as to the Display due to its ventilation holes blocked. Be sure to disconnect all cables before moving the Wide Plasma Display. • Moving the Display with its cables attached might damage the cables which in turn can cause fire or electric shock. Cleaning and maintenance The front of the display panel has been specially treated. Wipe the panel surface gently using only a soft, lint- free cloth. • If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry. • Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinners, otherwise the quality of the surface may be adversely affected. If the cabinet becomes dirty, wipe it with a soft, dry cloth. • If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth. • Do not allow any detergent to come into direct contact with the surface of the Wide Plasma Display. If water droplets get inside the unit, operating problems may result. • Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC. Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning. • Electric shocks can result if this is not done. Clean the power cable regularly to prevent it becoming dusty. • Built-up dust on power cord plug can increase humidity which might damage the insulation and cause fire. Unplug the cord from wall outlet and clean it with a dry cloth. Note: If still pictures from sources such as video games or computers are projected for long periods, the image may become burned into the Wide Plasma Display panel (producing an “afterimage”). TY-ST42PT1U TY-ST42PW1U TY-WK42PR1U 6 Accessories Accessories Supplied Check that you have the accessories and items shown Vyf □ Operating Instruction book I 1 Remote Control Transmitter | I I_I TNQE177 LJ RCA-BNC adapter plug TJS1A4270 V - --7 □ Ferrite core TSK1027 Batteries for the Remote Control Transmitter (R6 (AA) Battery x 2) □ Warranty Optional Accessories • Wall stand TY-ST42PW1U • Wall-hanging bracket (angled) TY-WK42PR1U • RS-232C Conversion cable TY-SCP02RS1U Remote Control Batteries Press and slide off the battery cover (+ and -) Note: (1) Make sure that the batteries are fitted properly. (2) Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately. (3) Do not mix different battery types, i.e. Alkaline and Manganese. Do not use rechargeable (Ni-Cad) batteries. 8 Quick Start Guide V_ Connections Connect the speakers. When connecting the speakers, be sure to use only the optional accessory speakers (TY-SP42PD1U). Refer to the speakers Installation Manual for details on speaker installation. Fit the speakers and connect the speakers. Rear Connect equipment such as a VCR. Connect the signal source equipment see pages 14 to 18. (Example) When connecting an S-VIDEO VCR. (S-VIDEO VCR) o “b •oooooo DD HI less than 7" 7/a (20 cm) DEO“* S-VlDEi Video input to S-VIDEO socket 2xRCA Audio cables Audio input to L/R sockets Rear GJÔ) trCD-fti rr-7] M ft za. 9 Quick Start Guide V_J Connect the Plug to the Wall Outlet How to Turn the Power On Push the Power switch on the Wide Plasma Display to turn the set on. The Power Indicator will light. Power-OFF..........Indicator not illuminated Stand-by..............Red Power-ON...........Green 10 Quick Start Guide Select the input signal 1 INPUT Press the INPUT button to select the input video signal to be played back from the equipment such as...