Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
This menu may be programmed for any desired turn on time and channel within a 24 hour period. IMPORTANT NOTE: CLOCK MUST FIRST BE SET BEFORE THIS FEATURE CAN BE USED. Clock setting can be confirmed when the time display appears on screen during initial turn on or channel change. 2:45 PH To Program On Timer Menu: 1. Press the ON TIMER button to display On Timer Menu. 1. 2. Press the ON TIMER button repeatedly to advance cursor (-*•) to ON TIME hours 2. position and it will display in Red. Use LEVEL (+) or (-) button to set hours AM or PM. 3. Press the ON TIMER button to advance to MINUTES position and it will display in 3. Red. Set minutes with the use of LEVEL (+) or (-) button. 4. Press the ON TIMER button to advance cursor to CH position and it will display in 4. Red. Press the LEVEL (+) or (-) button until the desired channel number is displayed. (Only channels programmed into Channel Memory are available.) ON TIME AM 10:15 CH 05 SET NO ON TIME-►AM 10:15 CH 05 SET NO ON TIME -•■AM 10:15 CH 05 SET NO ON TIME AM 10:15 ♦CH 05 SET NO 5. Press the ON TIMER button to advance cursor to SET position. Each press of 5. LEVEL (+) or (-) button selects YES or NO. Select YES if you want to activate the ON TIMER feature (On Timer indicator will light). Select NO if you do not want to activate the ON TIMER feature. ON TIME AM 10:15 CH 05 •♦SET YES Special Conditions Affecting On Timer • The ON TIMER feature must be reset each time it is desired. • After initial turn ON by the ON TIMER feature, turn OFF will automatically occur in 90 minutes unless a function button is pressed. • Turn ON prior to ON TIMER feature activation will cause the channel designated by the On Timer Menu to be tuned at the programmed time. NOTE: ON TIMER will need to be reset if the (Main) POWER is in the OFF Mode (Power Saving Stand-by Mode). -11 - © Sleep Button This feature automatically shuts off power after a predetermined time lapse of 30,60 or 90 minutes. 1 Press the SLEEP button once to set the Sleep Timer for 30 minutes as displayed On Screen 2 Press the SLEEP button twice to set the Sleep Timer for 60 minutes as displayed On Screen 3 Press the SLEEP button three times to set the Sleep Timer for 90 minutes as displayed On Screen 4 Press the SLEEP button continuously until the display reads 0, to deactivate the Sleep Timer • Display will flash 3,2 and 1 to indicate the last three remaining minutes pnor to turn off This allows the viewer to reset or deactivate this function before shut off • After Sleep Timer is set, use the RECALL button to find out the time that remains prior to automatic turn off A press of the SLEEP button while Sleep Timer function is active will reset the timer clock to the next higher 30 minute interval © Recall Button A press of this button will display the following Clock or Time remaining before Sleep Timer feature activation (If set). Channel Number Selected or Video if In Video Mode © Channel Keyboard “0 through 9” Buttons Press two keys to access any programmed or unprogrammed channel (Example “0" and “5" for channel 5) • Second number must be pressed within 2 seconds of the first entry or channel will change to that of the first number entered • The current channel will remain on when an invalid channel number is entered (Example Channel 70 while in the TV/ANT mode) • The RECALL button may be used at anytime to display the current channel • The TVA/IDEO button must be set to the TV position © Mute Button Press the MUTE button to mute sound immediately “M UTE" will display for a few seconds Press again and sound will be restored to same level as before muting Display of volume level adjustment will appear -12- © TV/Video Button Each press of the TV/VIDEO button, alternately switches between TV and Video Modes (Equipment connected to input jacks) • TV Mode - normal TV operation (CH and channel number will display On Screen). • VI DEO Mode-used when optional accessory video equipment (such as VCR, VI DEO DISC player, etc) is connected to the INPUT JACKS on back of set (VIDEO will display On Screen) BACK OF SET TERMINALS ON BACK OF RECEIVER VCR or VIDEO DISC PLAYER NOTE: Connect the Optional Equipment as shown, if your Optional Equipment is Stereo, place Optional Equipment in Monaural mode and use either left or nght Audio Output Jack Signal Level and Terminal Impedance Terminal (RCA) Level Impedance INPUT-VIDEO 1Vp-p 75 ohms INPUT-AUDIO 500mV rms for max output More than 10K © Menu Button The MENU button will allow the viewer to access all Video and Set Up Menus Press the MENU button repeatedly to display The Video Menus Color Tint Brightness Picture Sharpness The Set Up Menus • Auto Channel Programming • Program Channel Memory • TV/ANT-Cable Selection Menu • Set Clock Use the LEVEL (+) and (-) buttons to adjust or activate features as desired -13- Care and Cleaning Picture Tube (Turn set off) Use a mild soap solution or window cleaner and a de...