Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
See Programming the Remote Control in the Remote Control Quick Reference Guide. Procedure Press the PIP button on the Remote Control to display the PIP frame. Note: The PIP picture is the same as the main picture, initially. To view a different picture in the PIP frame: • Press the TV/VIDEO button on the Remote Control to select the video PIP source. Note: Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3. • Choose channels for the PIP frame by pressing the CABLE button on the Remote Control and using the numeric keypad or CH up/down buttons. • Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/down buttons. \s 1 fs SWAP Button The SWAP button switches the PIP and Main Picture source. Press the RECALL button for PIP and Main Picture source status, on screen. V Picture In Picture (PIP) Operation PIP Operation with a VCR - No Cable Box This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second picture. Connect your television to a VCR, as shown. (Some models have only one video input and some models have an S-VIDEO input.). TERMINALS ON BACK OF TV _ __vary)_ _ _ VCR ElEffli 1 antinput'1 1 ®@£ Incoming Cable =C@- CABLES NOT SUPPLIED Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See Programming the Remote Control in the Remote Control Quick Reference Guide. Procedure Turn the VCR OFF and tune the TV to channel 3. Press the PIP button on the Remote Control to display the PIP frame _ on screen. Note: The PIP picture is the same as the.Main picture, initially. • Press the TV/VIDEO button on the Remote Control to select the VIDEO PIP source. • Press the VCR button on the Remote Control and turn ON the VCR. • Press the TV/VCR button on the Remote Control. • Choose channels for PIP frame by pressing VCR CHANNEL up/down buttons on the Remote Control. • Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad __or CH up/down buttons. \\ I fy SWAP Button The SWAP button switches the PIP and Main Picture source. Press the RECALL button for PIP and Main Picture source status, on screen. 0 Main Menu Feature Chart Main Menu Feature Chart f№m g SET UP SET TIME When entered, TIME will display on screen after pressing POWER button, RECALL button, or changing channels. ANT Choose CABLE or TV to match the signal at your antenna input. AUTO PROG Automatically program channels with a signal into memory. MANUAL PROG Manually add or delete channels from memory. AUTO POWER ON Automatically turn TV POWER on when AC power is applied. CC MODE Select CC for Closed Captioning display. Select OFF to display closed captioning when MUTE button is pressed. LANGUAGES Select English, Spanish, or French menu. GEOMAGNETIC CORR (some models) Adjustment may be re...
Эта инструкция также подходит к моделям:Телевизоры - CT27G23 (1.01 mb)
Телевизоры - CT35G23 (1.01 mb)
Телевизоры - CT36G23 (1.01 mb)
Телевизоры - CT32G23 (1.01 mb)