Оценок - 5, средний балл: 4 ( )

Производитель: Panasonic Размер: 1023.13 kb Название файла: Язык инструкции:

For best reception an outdoor antenna is recommended. Note: Cable Mode is preset at the factory. Antenna users must change to TV Mode in the Set Upmenu under Prog Chan . Important Information Regarding The Use Of Video Games, Computers, Or Other FixedImage Displays. WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is not an operating defect and as such is not covered by Warranty. This television is designed to display constantly moving images on the screen. Continuous viewing of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), non- expanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an image), stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited. The extended use of fixed image program material can cause a permanent picture tube damage, shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be limited by performing the following steps: • Do not display the fixed image for extended periods of time. • Turn the power off when not in use. ENGLISH 3 • AUTO SET UP MENU Auto Set Up Menu For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures for setting up the features. IDIOMA/LANGUE To change menu language to ENGLISH, SPANISH or FRENCH. Procedure • Press VOL u to select English, Spanish or French. MODE To select TV (antenna) or CABLE mode depending on the signal source Procedure • Press VOL uto select TV or CABLE.. AUTO PROGRAM To automatically program all channels with a signal. Procedure • Press VOL u to start Auto Programming. GEOMAGNETIC CORRECTION This feature is used to adjust discoloration of the picture due to the earth’s magnetic field in the area. Procedure • Press VOL u to display adjustment menu. • Press • VOL or VOL u to adjust discoloration in picture. TILT CORRECTION This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area. Procedure • Press VOL u to display adjustment menu. • Press • VOL or VOL u to adjust picture tilt. ENGLISH 4 • OPTIONAL EQUIPMENT CONNECTIONS Optional Equipment Connections Note: The remote control must be programmed with supplied codes to operate the optional equipment. VCR Connection VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information. Note: VIDEO 1 input is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display Component or Video 1 depending on which source is connected. Procedure • Connect equipment as shown to front or rear Audio/ Video input jacks. • Select the Video mode by pressing TV/VIDEO button. • Operate optional equipment as instructed in equipment manual. Front Control Panel The front control panel can be used to acces menus and switch video mode when the remote control is not available.. Note: The ON/OFF indicator LED (red) will lit when the set is on. Procedure •Connect equipment to front Audio/Video input jacks. •Press TV/VIDEO button to select VIDEO 3 input mode. •Operate optional equipment as instructed in equipment manual. Cable Box Connection Follow this diagram when connecting your television to a Cable Box. Procedure • Tune the television to channel 3 or 4 depending on the RF out setting of the cable box. • Using the cable box, tune to the premium cable channel you want to view. Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV. TERMINALS ON BACK OF DTV-STB OR DVD PLAYER TERMINALS ON BACK OF TV CABLES NOT SUPPLIED Notes: • There are three video jacks, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. • Select DTV-STB to 480i output mode. TV set can receive 480i signal only. ENGLISH 5 • OPTIONAL EQUIPMENT CONNECTIONS ENGLISH Amplifier Connection (TO AUDIO AMP) Connect to an external audio amplifier input for listening to a stereo system. Note: TO AUDIO AMP terminals can not be connected directly to externalspeakers. CABLES NOT SUPPLIED External Amplifier Audio Adjustments • Select TV SPEAKERS ON from AUDIO menu. • Set amplifier volume to minimum. • Adjust television volume to desired level. • Adjust amplifier volume to match the television. • Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. • Volume, mute, ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: