Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press the RECALL button for PIP and Main Picture source status. _ Picture In Picture (PIP) Operation (Cont.) Picture In Picture (PIP) Operation (Cont) With a VCR - No Cable Box This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same time without or with an external video source (VCR). Connect your television to a VCR, as shown TERMINALS ON BACK OF TV VCR Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See Programming the Remote Control in the Remote Control Quick Reference Guide. Procedure Press the PIP button on the Remote Control to display the PIP frame on screen. Note: The audio is from the Main Picture only. To view an external video source in the PIP frame: • Press the TV/VIDEO button on the Remote Control to select the same video input to which your VCR is connected. • Verify the VCR is on. • Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/down button. • Choose channels for the PIP frame by pressing the TV button on the Remote Control and using the PIP Channel up/down buttons. \\ I fy IiOlr SWAP and RECALL Buttons ^\T/-v The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status. Main Menu Main Menu Main Menu » EG ACTION Button Press the ACTION button to display the Main Menu and submenus. Press the ACTION button repeatedly to exit. CH / VOL Buttons Press the CH (channel) or VOL (volume) buttons to select an icon. Use the CH buttons to highlight the desired features. Use VOL buttons to select and adjust features. Remote Action / Navigation Buttons CH Remote Control The Remote Control Quick Reference Guide is located within the package provided with this TV. V Main Menu Feature Chart Main Menu Feature Chart &MÜW SETUP fi SET TIME When entered, TIME will display on screen after pressing POWER button, RECALL button, or changing channels. ANT Choose CABLE or TV to match the signal at your antenna input. AUTO PROG Automatically program channels with a signal into memory. MANUAL PROG Manually add or delete channels from memory. CC MODE Select C1 or C2 for Closed Captioning display. Select OFF to display closed captioning when MUTE button is pressed. LANGUAGES Select English, Spanish, or French menu. AUDIO _IS TDM AUDIO NORM Reset BASS, TREBLE and BALANCE to factory default. BASS Increase or decrease the bass response. TREBLE Increase or decrease the treble response. BALANCE Emphasize the left/right speaker volume. MODE Select the audio mode: □ STEREO - Two channel audio reception. □ SAP - (Second Audio Program) Tune to the alternate audio channel if available in your area (bilingual or descriptive audio). □ MONO - One channel audio. Use when stereo signal is weak. Al ...
Эта инструкция также подходит к моделям:Телевизоры - CT27G34 (1.29 mb)
Телевизоры - CT32G34 (1.29 mb)
Телевизоры - CT36G34 (1.29 mb)
Телевизоры - CTG2977 (1.29 mb)