Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Panasonic, модель CT36G32

Производитель: Panasonic
Размер: 1.18 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Of course, the TV must be plugged into the cable box. NOTE: When this feature is activated (on), Timer features will be disabled. 1. Press Ol 2. Press A or& and ^3 or to highlight the Set-Up Icon. _ 3. Press (E1D to display the Set-Up Menu. SET-UP 4. Press ^ to highlight AUTO POWER ON. 5. Press ^ or b to select SET or OFF. 6. Press (EED twice to exit menus. CC (Closed Caption) Mode This Receiver has a built in decoder that provides a visual depiction of the audio portion of a television program, in the form of written words across the screen (White or Colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. When the Closed Caption is in the OFF Mode: The viewer may display closed caption by pressing 0^0 on the remote control. Press again to delete. 1. Press (EU. 2. Press A or^ and ^ or b to highlight the Set-Up Icon. 3. Press (ESS to display the Set-Up Menu. 6. Press twice to exit menus. Geomagnetic Corr (Correction) NOTE: This feature is for Models CT-36G32/U only. This TV incorporates a special feature for the convenience of the customer. However, adjustment may be required when the TV is moved (due to the influence of earth’s magnetic field) which may cause the picture to tilt slightly. This adjustment is preset at the factory. If necessary, follow these procedures to adjust the tilt. 1. Press 2. Press A or^ and ^ orb to highlight the Set-Up Icon. 3. Press to display the Set-Up Menu. SET-UP SET TIME ANT AUTO PROG NO AUTO POWER ON ‘eg MODE TV MANUAL PROG NO OFF OFF FRANÇAIS GEOMAGNETIC CORR Press A or ^¡7 to highlight GEOMAGNETIC CORR. Press ^ orb to display the Geomagnetic Correction adjustment menu. Press ^ or b to adjust the picture tilt until left and right side of tilt adjustment bar is parallel to the bottom of picture frame (if necessary). NOTE: Discoloration may be visible in picture corners if tilt bar is not parallel to the bottom of picture frame. 4. 5. 6. 7. Press (sis) twice to exit menus. -25- SET TIME — : ANT TV AUTO PROG NO MANUAL PROG NO AUTO POWER ON OFF fee] MODE OFF FRANCAIS Programming the Home Theater Remote The remote control can be set to control other manufacturers components, by utilizing the MODE SELECTION BUTTONS for CABLE, DSS, VCR, RCVR (a Receiver or Amplifier), CD, LD, and AUX (for Cassette Deck, Second VCR or a DVD.) Code Known Use the following procedure for setting up the remote control using the numerical buttons when the component’s remote code is known. [Tl Determine the brand of the component. [21 Identify the code(s) associated with the brand from the infrared code index (see following pages). Record all possible codes. 3] Confirm that the component is plugged in and-operating properly, then turn it OFF. Press and hold theifs^l button, then the button so that both are pressed at the same time for at least] 5 seconds. Then let go of the buttons. 5J Press the appropriate Mode button for the component. Enter the 3-digit code, by using the Remote Control Keypad “0” through ”9” buttons. V ■> ’ ÖO ft-0,_\0 O ft ¡.’V ■ .^C^oVv’o" ’•’o:o Now the remote entered code. is set for the m Code From Index Sheet [71 Press the button to test the remote. If the correct code is setup for the component (in step E), the component will turn on. Code Unknown Use the following procedure for setting up the remote control when the component’s remote access code is not known. This procedure uses the ’’sequence method”. m Confirm that the component is plugged in and operating properly, then turn it OFF. Press and hold the if^D button, then the button so that both are pressed at the same time for at least 5 seconds. Then let go of the buttons. EUR511050 H Press the appropriate Mode button for the device. ¡J Press the button to step over to the next code. Press the button to test the remote. If the correct code is sent, the component will turn on. Once the correct code is found, press the (f^)) button to store the code. Repeat from step HI above until the proper component code is found. It may take several attempts before the correct code is found. NOTE: Some brands have multiple codes. Repeat the procedure using another listed code until the component responds correctly. NOTE: If an incorrect code is entered, or when the operation is not completed within 30 seconds, the settings will not change. Infrared Remote Codes for Specific Components Helpful Hint: Write down the code numbers for your components in the space provided below. This r will serve as a handy reference whenever you need to reprogram your remote control. CABLE Cable TV Converter Box DSS Digital Satellite System Other Component Other Component VCR Video Cassette Recorder RCVR Receiver or Amplifier Other Component Other Component CD Compact Disc Player LD Laser Disc Player Other Component Other Component — 26 — VCR Infrared Codes Index The Universal Infrared R...

Эта инструкция также подходит к моделям:
Телевизоры - CT27G32 (1.18 mb)
Телевизоры - CT27G32U (1.18 mb)
Телевизоры - CT32G32 (1.18 mb)
Телевизоры - CT32G32U (1.18 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории