Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
DIf you don’t know the frequency or channel of the TV channel of your choice, press the qSC button to start the channel search. f In the line ’Programme number’ select the programme number you want e.g.: ’P01’, using the DSr or qSC button. g If you want to change the TV channel name, press the qSC button in line ’Name edit’. E Select the character you want to change with the DSr or the qSC button. Change the character with the AP q or the P rB button. Select the next character in the same way. E To confirm the information, press the OK button. h If you want to change the automatic tv channel setting, select the line ’Fine tuning’. With the DSr or qSC button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems. i Press the OK button to store the TV channel. DIf you want to search for further TV channels, start again at step e. j To end, press the MENU button. Satellite receiver You can receive channels from the satellite receiver via the scart socket EXT.1 . To do this, select the channel number ’E1’ with the P pAB button. You will have to select the channels to be received by the satellite receiver on the receiver itself. Automatic TV channel search Your TV-VIDEO Combi will search for all TV channels. If you want to start the automatic TV channel search again, then follow the instructions below. a Press the MENU button on the remote control. The main menu will appear. b Select the line ’Installation’ with the AP q or P rB button and confirm with the qSC button. c Select the line ’Autoinstall’ with the AP q or P rB button. d Press the qSC button. The ’Automatic TV channel search’ starts. Searching... CHANNELS FOUND: //////,,,,,,,,,,,,,,,,,,,,, e When the TV channel search is complete, ’Installation comp.’ will appear on the screen. How to search for a TV channel manually, you can read in the section ’Manual TV channel search’. DAutomatic Channel Installation: Some cable companies or broadcasters offer the possibility to install TV channels automatically with ’ACI’. Information about the installation offered and how to select it, will appear on the screen. This set will recognize and install TV channels with ’ACI’ automatically. TV channels will be stored from programme number 1 onward. If ’ACI’ cannot identify a TV channel, you can search for it using the method as described in the section ’Manual TV Channel Search’. Channel Number Allocation a Press the MENU button. The main menu appears. b Select the line ’Installation’ with the menu buttons AP q or P rB and confirm with the menu button qSC . c Select the line ’Sort channels’ with the menu buttons AP q or P rB and confirm with the menu button qSC . SORT CHANNELS 01 xxx 04 aaa 02 yyy 05 bbb 03 zzz 06 ccc a Exit: « press MENU press OK d With the menu buttons AP q , P rB , DSr or qSC , select the TV channel to which you want to allocate a programme number and press the OK button. e With the menu buttons AP q , P rB , DSr or qSC , shift the TV channel to the programme number you wish to allocate to this TV channel and press the OK button. f Repeat steps dto euntil you have allocated a programme number to all the required TV channels. g To end, press the MENU button. Delete a TV Channel a Press the MENU button. The main menu appears. b Select the line ’Installation’ with the menu buttons AP q or P rB and confirm with the menu button qSC . c Select the line ’Sort channels’ with the menu buttons AP q or P rB and confirm with the menu button qSC . SORT CHANNELS 01 xxx 04 aaa 02 yyy 05 bbb 03 zzz 06 ccc a Exit: « press MENU press OK d With the menu buttons AP q , P rB , DSr or qSC , select the TV channel you want to delete and press the OK button. e Repeat step d, until you have deleted all the required TV channels. Setting the language You can select the language for the on-screen display (OSD). a Press the MENU button on the remote control. The main menu will appear. b Select the line ’Installation’ with the AP q or P rB button and confirm with the qSC button. c Select the line ’LANGUAGE’ with the AP q or P rB button. d Select your language with the DSr or qSC button. e To end, press the MENU button. Setting the time and date a Press the MENU button on the remote control. The main menu will appear. b Select the line ’Set clock’ with the AP q or P rB button and confirm with the qSC button. SETCLOCKTime15:36Year 1999 Month 6 Date 8 Smart clock ON a Exit: « press MENU c Check the time in line ’Time’. If required, please change the time with the 0-9 buttons on the remote control. d Check ’Year’, ’Month’ and ’Date’ in the same way. You can switch between entry fields with AP q or P rB button. Confirm each entry with the OK button. e To end, press the MENU button. Automatic clock and date setting (SMART CLOCK) DIf a TV programme, which transmits TELETEXT, is stored with programme number ’P01’, time and date will be set automatically. DClo...
Эта инструкция также подходит к моделям:Телевизоры - 14PV325/05S (726.55 kb)