Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
See the optional equipment manual for more information. (Some models have only one video input and some models have an S-Video input.) TERMINALS ON BACK OF TV (may vary) VCR Procedure 1. Connect equipment as shown to rear AudioA/ideo input jacks. 2. Select the Video mode by pressing TV/VIDEO button. 3. Operate optional equipment as instructed in equipment manual. Note: If both S-VIDEO and VIDEO input are used at the same time, two images will appear on the TV screen. 5 Main Menu TO AUDIO AMPLIFIER Connect to an external audio amplifier input for listening to a stereo system. Note: Do not connect TO AUDIO AMP terminals directly to external speakers. Audio Adjustments 1. Select TV SPEAKERS ON from the AUDIO menu. 2. Set amplifier volume to minimum. 3. Adjust TV volume to desired level. 4. Adjust amplifier volume to match the TV. 5. Select TV SPEAKERS OFF&VAO from the AUDIO menu. 6. Volume and Mute are now controlled by the TV. Note: In OFF&FAO the volume is controlled by the external amplifier. Main Menu Main Menu EXIT ACTION Button Press the ACTION button to display the Main Menu and submenus. Press the ACTION button repeatedly to exit. CH I VOL Buttons Press the CH (channel) or VOL (volume) buttons to select an icon. Use the CH buttons to highlight the desired features. Use VOL buttons to select and adjust features. Remote Navigation Buttons CH CH 6 _Picture In Picture (PIP) Operation Picture in Picture (PiP) Operation PIP Operation with a VCR and Cable Box This television includes a Picture In Picture (PIP) feature. A second video source (VCR, Camcorder, etc.) is required to provide a second picture. Connect your television to a VCR and Cable Box, as shown. (Some models have only one video input and some models have an S-VIDEO video input.) TERMINALS ON BACK OP TV VCR CABLE BOX Note: The Remote Control must be programmed with supplied codes to opera/e the VCR and Cable Box. See Programming the Remote Control in the Remote Control Quick Reference Guide. Procedure Press the PIP button on the Remote Control to display the PIP frame. Note: The PIP picture is the same as the main picture, initially. To view a different picture in the PIP frame: Press the TV/VIDEO button on the Remote Control to select the video PIP source. Verify the CABLE BOX and VCR are ON and the VCR is tuned to channel 3. Choose channels for the PIP frame by pressing the CBL button on the Remote Control and using the numeric keypad or CH up/down buttons. Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/down buttons. \\ \fy SWAP Button The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status. Picture In Picture (PIP) Operation PIP Operation with a VCR • No Cable Box This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second picture. Connect your television to a VCR, as shown. (Some models have only one video input and some models have an S-VIDEO input.) TERMINALS ON BACK OF TV VCR Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See Programming the Remote Control in the Remote Control Quick Reference Guid...
Эта инструкция также подходит к моделям:Телевизоры - CT2771S (906.76 kb)
Телевизоры - CT35G25 (906.76 kb)
Телевизоры - CTG2178 (906.76 kb)
Телевизоры - CTG2178X (906.76 kb)