Войти:
Оценок - 2, средний балл: 3.5 ( )

Инструкция по эксплуатации Panasonic, модель CTF2511X

Производитель: Panasonic
Размер: 843.47 kb
Название файла:
Язык инструкции:enes
Перейти к скачиванию



Фрагмент инструкции


For best results: • Use 75-ohm coaxial shielded cables. • Use appropriate input and output connectors, that match your component connectors. • Avoid long cables to minimize interference. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER Polarized plug OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS. Cable / Antenna Connection For proper reception, either a cable or antenna connection is required. Cable Connection Incoming Cable from Cable Company Connect the cable supplied by your local cable company. Note: A cable converter box may be required for proper reception. Check with your local cable company for compatibility requirements. 75 Ohm VHF/UHF on back of TV Antenna Connections • For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. • Antenna Mode must be set to TV. Incoming Cable from Home Antenna Cable Preset Cable Mode is preset at the factory. Antenna users must change to Antenna Mode in the Setup Menu. 6 INSTALLATION Optional Equipment Connections IMPORTANT INFORMATION REGARDING USE OF VIDEO GAMES, COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS. The extended use of fixed image program material can cause a permanent “shadow image” on the picture tube. This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible picture tube deterioration can be limited by observing the following steps: A. Reduce the brightness/contrast setting to a minimum viewing level. B. Do not display the fixed image for extended periods of time. C. Turn the power off when not in actual use. Note: The marking orretained image on the picture tube resulting fromfixedimage use is not an operating defect and as such is not covered by Warranty.This product is not designed to display fixed image patterns for extended periods of time. VCR Connection VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information. Note: VIDEO 1 input isadual-purpose input. It isprimarily intendedfor connection with 480i devicessuchas a DVDplayer usingthe Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screenlabel wil ll display Component or Video 1 depending on which source is connected. CONNECTIONS ON BACK OF TV CABLES NOT SUPPLIED VCR Jack used for 1/8" headphone pl ug L R AN T I N V I DE O OUT A UDIO OUT AN T O U T INP U T 3 S -V I DE O V I DE O L A UDIO R H P J CO M P ONE N T VI D E O I N PU T INP U T 1 P BP R Y / V I DE O VI D E O INP U T 2 S-VI D E O AN T A UDIO LR R L U s e ei t her t h e S-Vi deo or V i de o c onnec t i on. TERMINALS ON FRONT OF TV Procedure 1. Connect equipment as shown to front or rear Audio/Video input jacks. 2. Select the Video mode by pressing TV/VIDEO button. 3. Operate optional equipment as instructed in equipment manual. 7 INSTALLATION Cable Box Connection Follow this diagram when connecting your television to a cable box only. CONNECTIONS ON BACK OF TV COMPONENT VIDEO INPUT INPUT 1 PBPR Y/VIDEO VIDEO INPUT 2 S-VIDEO R L TO AUDIO AMP ANT AUDIO LR R L INCOMING CABLE CABLES NOT SUPPLIED CABLE BOX ANT IN ANT OUT Note: The remote control must be programmed with supplied codes to operate the cable box. See Programming the Remote Control in theRemote Control Quick Reference Guide. Viewing a premium (scrambled) cable channel Procedure 1. Tune the television to Channel 3 or 4 depending the RF out setting of the cable box. 2. Using the cable box, tune to the premium cable channel you want to view. 8 INSTALLATION VCR and Cable Box Connection Follow this diagram when connecting your television to both a VCR and a cable box. VCR CABLE BOX COMPONENT VIDEO INPUT INPUT 1 PBPR Y/VIDEO VIDEO INPUT 2 S-VIDEO ANT AUDIO LR R L Incoming Cable ANT IN ANT OUT L R ANT OUT VIDEO OUT AUDIO OUT ANT IN CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV Use either the S-Video or Video connection. Note: The remotecontrolmust be programmed with suppliedcodes tooperate theVCR and cable box. See Programming the Remote Control in the Remote Control Quick Reference Guide. Viewing a premium (scrambled) cable channel Procedure 1. Tune the television to CH 3 or CH 4 depending on the Cable box RF out. 2. Using the cable box, tune to the premium cable channel you want to view. Recording a premium (scrambled) cable channel Procedure 1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 2. Turn the VCR ON...

Эта инструкция также подходит к моделям:
Телевизоры - CT24SX11 (843.47 kb)
Телевизоры - CT24SX11U (843.47 kb)
Телевизоры - CTF2511 (843.47 kb)
Телевизоры - CTF2521L (843.47 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории