Оценок - 3, средний балл: 3.3 ( )

Производитель: Philips Размер: 967.42 kb Название файла: Язык инструкции:

The connection is to be made via the Euroconnector or Cinch video input of the TV. Note: The source to be connected is also to be provided with a suitable connection which transmits CVBS signals. IT PIP nr © ET a pip ET C3 a Operating PIP (with TV switched on) Switching on: • Press button B. The extra TV picture appears in the last selected position and is from the last selected source. Note: When the TV is switched on with the POWER button, and subsequently PIP with button ©, the extra TV picture appears in the top right-hand corner of the screen. The PIP picture is then the same as the main picture. Switching off: • Press button B once again. Source selection Select required PIP source* • Press button C3 to change a connected (PIP) source. When selecting a source with button C3, there appears on the screen the name of the source of the main picture and the name of the source selected for PIP in the form of a DOS indication. * PIP sources 1. TV as PIP source (PIP picture surround is blue). 2. PIP from EXT1 (PIP picture surround is orange). 3. PIP from EXT2 (PIP picture surround is purple). 4. PIP from EXT3 or EXT4 (dependent on the setting of the source selection buttons) (PIP picture surround is green or red). Note: If the video recorder Is selected as the source, you may select the tuned TV stations as PIP picture using the programme selection buttons on the video recorder. 8 IV C3 D 0 □r Freezing the PIP picture • Press button C3, the PIP picture now freezes. • Press button C3 again to discontinue the frozen PIP picture. Note: The frozen picture can also be discontinued by selecting another source for the PIP picture. Moving the PIP picture • Press button a. The PIP picture is moved each time button is pressed. Changing the picture • Press button 0. The main picture is then exchanged with the PIP picture. • Press button 0 again to change further. IT C9 D ET C3 a PIP picture in the TV setting Any TV picture can be held as a PIP picture while watching TV. (In this case PIP is not used). • Press button C3. PIP is now switched on and the same TV picture now appears as a frozen PIP picture. • Press button CB again to make held picture disappear. Use of video recorder with PIP • Select the video recorder as source with button 0. a. Select the required TV station to be watched in the PIP picture using the programme selection buttons on the video recorder. b. You may now watch a video tape in the PIP picture by pressing the play button of the video recorder. O (D CD V oo Standby (interruption of picture and sound) • Press button (1). Indicator ô lights up. You can switch on the TV again by pressing a digit button on the remote control. 9 Operating the TV without remote control The following controls are on the TV: plus A and minus V buttons for volume and plus A and minus V buttons for programme number selection, with which the most important functions can also be operated without remote control. With the SOURCE SELECTION Q-buttons 1,2,3,4 and TV, you can select 4 connected sources and normal TV use, respectively. Teletext General description of Teletext If Teletext is being broadcast it gives you a wide variety of information on all kinds of subjects by headings and pages, The remote control has the following buttons (with symbols in yellow) : ID Teletext on D Return to TV programme (2 Teletext with TV programme X Interruption of Teletext A r Double letter height Enter in memory The functions of the various Teletext symbols are given later in the text. General information ® ® è I cal 'P101©125?'P101©1259"P103C31310|([!Ï)(D‘ After Teletext has been switched on, an information line appears on the top of the screen. Depending on your selection, the following words may be indicated here: (a) = the number of the page which is on the screen (possibly combined with time code, subcode or stop changing pages). © = the number of the page coming onto the screen (possibly combined with time code or subcode). The colour is normally green, but once the page has been found the colour becomes white and this page number comes into position at ® on the information line. © = the page number which Is stored. The colour is normally green, but once the page has been found the colour becomes white. © = the Teletext symbol and, depending on use, the symbol for double letter height or concealed information. 10 et a 13 cT~ a Operating Teletext Switching on/off Select the required TV station on which Teletext is transmitted. • To switch on: Press button (D. Page number 100 (generally the contents) now appears on the screen. • To switch off: Press button a. In the following description of the Teletext functions it is assumed that Teletext has been switched on. Page selec...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: