Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Note the direction of the arrow printed on the Smart Card. Inserting the CA module in the Cl slot Switch off the TV set's mains switch. Ejector button Remove the cover from the rear of the set. Carefully insert the CA module in Cl slot 1 or Cl slot 2 with the contact side forward. If you are standing in front of the TV set (display) then the logo on the CA module must be pointing to the rear. Do not use force. Make sure the module is not twisted in the process. If the CA module is correctly installed, the ejector button protrudes a little further. CGBj - 32 Switch on the TV set The following dialogue appears: Search wizard Your TV set hast detected a new CA module. This requires a station search for all new receivable station Continue with OK OK start the search wizard. Checkthe recommended search routine parameters and then start the search. Replace the cover. Calling CA module information This menu is only available for digital stations. (menu) Call TV menu < ► Select Settings, ▼ go to the menu line below. < ► Select Miscellaneous, ▼ go to the menu line below. < ► Select CA module: xxx (xxx corresponds to the CA module provider), OK to call information. The content of this menu depends on the provider of the CA module. CA module Switch off the TV set's mains switch. Remove the cover from the rear of the set. Press in the ejector button on the appropriate module drawer, the module is released. Remove the module from the set. Replace the cover. DVB Software update TV base software and DVB software To ensure that your TV set is always up to date from time to time Loewe will make updated TV base software and DVB software versions available. These updates are broadcast via satellite (at present only via ASTRA1), or they can be Installed on your set via a USB stick. Please contact your dealer for a software update via USB stick. Automatic search for new software via satellite The set automatically determines whether a new software version is available per satellite during the night when the EPG data are updated. However the TV set must remain in standby mode for this (do not switch off the set with the mains switch). If a new software version has been found, the set informs you with an on-screen message the next time it is switched on (see right column - Loading new software). Manual search for new software via USB /satellite If it is not automatically displayed that a new software is available when switching on the set, you can also run a manual search. The system first checks whether a software update is available on an inserted USB stick. If not the system will search for an update via satellite. Call TV menu < ► Select Settings, ▼ go to the menu line below. < ► Select Miscellaneous, ▼ go to the menu line below. < ► Select Software update OK calls software update wizard. The software versions currently loaded in the set are listed. Software update wizard Current TV base software: V2.1.0 C u rren t DVB softwa re: VI. 3.0 You can now search for new software. Please select the software type and start the search with the ©button. TV base software © ‘ DVB software © Proceed -»• ▼ Select software type: Select TV base software or DVB software, OK start search. If new versions are available then a subsequent screen message will be displayed. Loading new software New software available via search. If a new TV and a new DVB software Is available In the automatic search for new software versions, you can select the software type to be updated. Software update wizard A new software is available. Please specify whether and, if so, when you want to load the new software Load new software now © T Load new software after switch off to standby ■Hiüf Keep current software © Proceed 1 -»• ▼ Select update option: Load new software now Load new software after switch off to standby (update after switching off) Keep current software (no update desired) OK more or exit wizard. OK start software update A bar is displayed to inform you about the progress of the load process. During the loading process do not switch off your device via the mains switch! This may last up to 20 minutes. You will be informed when it is finished. At the end of loading: Turn off the TV set off with the mains switch and turn it on again. This is not necessary when loading the software with the update option Load new software after switch off to standby mode If a new software has not been updated via satellite, you will be reminded of this several times when switching on the set. 33 - ® Radio Radio mode You can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/AV inputs. Radio mode on/off Radio mode on: RADIO button on the remote control. R on the TV set operating ring. © Switch to ... Scan stations >-0 Select station Previous station ...
Эта инструкция также подходит к моделям:Телевизоры - Spheros R 32 HD+ (11.29 mb)