Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
• Before connecting, always check the instruction manual of the device for connection. •To ensure driving safety, video images will not appear on the screen while the vehicle is moving. The VTR images are viewable only when the To video OUT terminal To audio OUT terminal vehicle parking brake is engaged. •Audio cannot be heard in VISUAL mode. Video (video camera) etc. Notes: • Always turn off the power on this unit and the video (video camera, etc.) when connecting. • Before connecting, always check the instruction manual of the device for connection. •To ensure driving safety, just as with the TV images, even when the VTR is connected, video images will not appear on the display while the vehicle is moving and only the sound can be heard.The VTR images are viewable only when the vehicle parking brake is engaged. • Video from external devices connected to VTR1 or VTR2 can be viewed on a rear monitor sold separately. TB851P/TB853W 13 English Operating with an external device .Viewing video images 1. Press the [SRC ] button to select VISUAL1 or VISUAL2. The setting shifts in the sequence shown below, each time the [SRC ] button is pressed. TV . VTR1 . VTR2 . VISUAL1 . VISUAL2 . TV . ... Video from the external device connected to the video in terminal (visual input 1 or visual input 2) appears on the screen. Notes: • See the instruction manual of the external device to be connected to find out how to operate that external device. • Video from external devices connected to visual input 1 or visual input 2 can be viewed on a rear monitor sold separately.To view on that rear monitor, connect the rear monitor to the VIDEO OUT (video output) terminal on this unit. Viewing CCD camera images Connect the CCD camera to this unit correctly When the CCD camera is correctly connected to this unit and set, the following functions are activated. •Automatically displays CCD camera images when the gear is set in reverse. Note: • Connect the reverse gear signal wire from the power supply box of the CCD camera to the positive (+) backlamp wire. •A caution message appears during display of the camera images. See “Setting the caution message for use during CCD camera operation ”. (See page 18.) 14 TB851P/TB853W Changing the settings (ADJUST mode) How to set 1. Press the [ADJ] button to display the English ADJUST mode screen. (Main screen during TV mode) Each press of the [ADJ] button switches the (ADJ_MONITOR screen) (ADJ_EXTERNAL screen) (ADJ_HVAC screen) (ADJ_OTHER screen) (BRIGHT adjustment) (Main screen during TV mode) ADJUST mode screen. 2. Press the [w] or [z] button to select the item to set. 3. Press the [A] or [D] button to select the setting value. 4. Press the [ENT] button to return to the original screen. Note: • The description for making settings does not include selecting the setting item or returning to the previous screen. Proceed to the next item after you fully understand this description. TB851P/TB853W 15 English Changing the settings (ADJUST mode) Adjust the screen image quality Screen image quality Adjust the screen luminance, brightness, hue and color level to view video at your own preferred image quality. •You can only make this adjustment in TV/VTR/ VISUAL modes while the vehicle is stopped. • Only the screen luminance and brightness can be adjusted in modes other than TV/VTR or when driving in TV/VTR mode. • Only the screen luminance and brightness can be adjusted during an interrupt (break-in) by the rear camera. .DIMMER adjustment 1. Select “DIMMER ” on the ADJ_MONITOR screen. 2. Press the [A] or [D] button to adjust the dimmer. • A : Darkens the screen • D : Brightens the screen .BRIGHT adjustment 1. Select “BRIGHT ” on the ADJ_MONITOR screen. 2. Press the [A] or [D] button to adjust the brightness. • A: Lowers the screen luminance. • D : Increases the screen luminance. .COLOR adjustment 1. Select “COLOR ” on the ADJ_MONITOR screen. 2. Press the [A] or [D] button to adjust the color. • A : Decreases the color density. • D : Increases the color density. .HUE adjustment 1. Select “HUE ” on the ADJ_MONITOR screen. 2. Press the [A] or [D] button to adjust the hue. • A : Adds green. • D: Adds red. Note: • Can be adjusted on the NTSC system. Cannot be adjusted on PAL system. Rear monitor lock . The factory setting is at “OFF ”. 1. Select “MONILOCK ” on the ADJ_EXTERNAL screen. 2. Press the [A] or [D] button to select ON or OFF. Switching the FM modulator audio output (only on TB851P) FM modulator is a system for temporarily converting audio signals on this unit to FM signals and playing them back as FM stereo on the car audio radio section. . The factory setting is at “ON ”. 1. Select “MONILOCK ” on the ADJ_EXTERNAL screen. 2. Press the [A] or [D] button to select ON or OFF. • ON : To use the FM modulator to output stereo sounds from car radio peaker. • OFF : If not using the FM modulator. Changing the FM modulator frequency (only on TB851P) . The factory setting is at “88.1MHz ”. 1. Select “MODUFREQ ” on...
Эта инструкция также подходит к моделям:Телевизоры - TB851P (1.54 mb)