Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
2. Connect a set of audio cables from AUDIO OUT on the DVI device back panel to the INPUT/DVI Analog Audio on the TV back panel. The red cable connects to the R (right) channel, and the white cable connects to the L (left) channel. NOTE: The HDMI connection supports copy protection (HDCP). Some devices require connecting to an analog input first, in order to view on-screen menus and select DVI as the ouput. Please review your equipment instructions for DVI connectivity and compatibility. COMPONENTYPbPr (480i/480p/720p/1080i)INPUT12S-VIDEOVIDEOAUDIO- LEFT/ (MONO) AUDIO- RIGHTDTV/CABLE/ VHF/UHFANT 1 / MAINANT 2 / AUXDIGITALAUDIOOUTPUTCableCARD™ USE WITH ANT 1 CARD TOP12YPbPrAUDIO- LEFT/ (MONO) AUDIO- RIGHTOUTPUTAUDIOOUTPUTRECORDOUTPUTDVIAnalog Audio12VIDEOAUDIO- LEFT/ (MONO) AUDIO- RIGHTMONITORLINK™/HDMIVIDEO 480i/480p/720p/1080iAUDIO PCM LINEAR12IEEE 1394 INPUT/ OUTPUTNet CommandIR EMITTER .................. INPUTPC - 60HzVGA, W-VGA, SVGA, W-SVGA, XGA, 1280 X 720 .......................................... .............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................. ............................................ .......... ...... .................................................................................................... COMPONENTYPbPr (480i/480p/720p/1080i)INPUT12S-VIDEOVIDEOAUDIO- LEFT/ (MONO) AUDIO- RIGHTDTV/CABLE/ VHF/UHFANT 1 / MAINANT 2 / AUXDIGITALAUDIOOUTPUTCableCARD™ USE WITH ANT 1 CARD TOP12YPbPrAUDIO- LEFT/ (MONO) AUDIO- RIGHTOUTPUTAUDIOOUTPUTRECORDOUTPUTDVIAnalog Audio12VIDEOAUDIO- LEFT/ (MONO) AUDIO- RIGHTMONITORLINK™/HDMIVIDEO 480i/480p/720p/1080iAUDIO PCM LINEAR12IEEE 1394 INPUT/ OUTPUTNet CommandIR EMITTER .................. INPUTPC - 60HzVGA, W-VGA, SVGA, W-SVGA, XGA, 1280 X 720 .......................................................................................... Figure 9. Connecting a DVD Player with Component Video Note: NetCommand® assumes you connected your DVD player to Component-2. If you add a second DVD or use any other inputs for your DVD, this change must match in the NetCommand system. See Edit NetCommand... in Chapter 3 for more information. Figure 10. Connecting a DVI Device IMPORTANT See Appendix B for component video signal compatibility information. For digital audio connections to your A/V receiver , see your DVD player and A/V receiver Owner’s Guides. CAUTION: To ensure continued FCC compliance, the user must use a shielded video interface or HDMI cable with bonded ferrite cores at both ends when using the PC input. Connecting an HDTV Cable Box or Satellite Receiver with Component Video Connecting an HDMI Device HDTV Cable Box or Satellite Receiver with Component Video Figure 11 A coaxial splitter, RCA component video cables, and audio cables are required. These are not included with the TV. 1. Connect the outside antenna, cable, or satellite to ANT or SATELLITE IN on the cable box or satellite receiver. See your device’s owner’s guide for instructions and cable compatibility. 2. Connect the incoming terrestrial antenna or cable (not satellite) to ANT-1 on the TV back panel (a coaxial splitter, available at most electronic supply stores, may be required to complete this installation). COMPONENTYPbPr (480i/480p/720p/1080i)INPUT12S-VIDEOVIDEOAUDIO- LEFT/ (MONO) AUDIO- RIGHTDTV/CABLE/ VHF/UHFANT 1 / MAINANT 2 / AUXDIGITALAUDIOOUTPUTCableCARD™ USE WITH ANT 1 CARD TOP12YPbPrAUDIO- LEFT/ (MONO) AUDIO- RIGHTOUTPUTAUDIOOUTPUTRECORDOUTPUTDVIAnalog Audio12VIDEOAUDIO- LEFT/ (MONO) AUDIO- RIGHTMONITORLINK™/HDMIVIDEO 480i/480p/720p/1080iAUDIO PCM LINEAR12IEEE 1394 INPUT/ OUTPUTNet CommandIR EMITTER .................. INPUTPC - 60HzVGA, W-VGA, SVGA, W-SVGA, XGA, 1280 X 720 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ .......................................................................................... .................... Figure 11. Connecting an External HDTV Receiver with Component Video Connections 3. Con...
Эта инструкция также подходит к моделям:Телевизоры - WD-52627 (5.43 mb)
Телевизоры - WD-52627 (5.43 mb)
Телевизоры - WD-62627 (5.43 mb)
Телевизоры - WD-52627 (5.43 mb)