Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
Advanced Features menu. -► The TV’s clock must be set before you can set the timer. If you have not set the clock and/or day, you will see the CLOCK menu instead of the Timer menu Figure 2. Timer menu. Timer Menu (Figure 2) The timer can be turned On or Off. When On, you need to select the time to turn on, the day to turn on, and the channel to display. At your preselected time, the timer will turn the TV on, and a message will be displayed, “Press a key for the TV to stay on”. Any button on the remote control must be pressed within 5 minutes, or the TV will turn itself off. Set Time Select the hour and minute, including AM or PM, when the TV is to turn on. Press ▲ or ▼ to slowly adjust the time. Press and hold ▲ or ▼ to quickly adjust the time. Set Day Select the days that the TV will turn on automatically. You can select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week. Input Select the input to use when the timer turns on the TV. If the TV is already on, the timer will turn the TV to this selected input. Channel When Ant-A or Ant-B is the selected input, you may select any memorized channel. The TV will tune to this channel when the timer turns it on. 37 Timer Convergence Part III: Setup Advanced Features Menu: Convergence Convergence (Figure 1) Your Mitsubishi TV has three picture tubes which are aligned to properly converge the projected light beams on the screen. Each picture tube projects a single color of red, blue or green. During production, your TV was carefully adjusted to properly align these colors. As a special feature, you have the ability to adjust the red and blue light beams in reference to the fixed green light beam. This process is called convergence. r~1 ADVANCED FEATURES menu Q, TIMER CONVERGENCE ■I Video Mute : Off ■I Front Button Lock : Off ■1 PIP Demo Mode : Off ADJUST to select or change option ENTER for menu Menu to return Figure 1. Advanced Features menu. Convergence Menu (Figure 2) Convergence aligns the entire screen at once. Select either Red Convergence or Blue Convergence to begin alignment. To align 64 individual points, see Advanced Convergence, page 39. Reset Factory Defaults (Figure 2) This allows you to reset the convergence to the factory settings. The message “Convergence Reset Completed” will be displayed when the factory defaults have been Convergence Screen (Figure 3) When the Red and Blue crosshairs are properly converged, the center-screen crosshairs will appear white. You can use ▲, ▼, <, or ► to move the Red and Blue crosshairs. Press VIDEO to switch between Red and Blue. Press AUDIO for the Advanced Convergence screen, and see Advanced Convergence, page 39, for instructions. Figure 2. Convergence menu. Press ADJUST to converge the lines Press VIDEO to switch to Blue Press MENU to go back Press CANCEL to delete changes Press AUDIO for Advanced Convergence Figure 3. Convergence screen. SS Part III: Setup Advanced Features Menu: Advanced Convergence and Special Features mmm m ■■■ m mmm ess IN help ■■■1 Figure 1. Advanced Convergence screen. I IMPORTANT I There are more than 64 line intersections, but the flashing bracket will only stop at the 64 adjustment points. ADVANCED FEATURES menu 2)™ER CONVERGENCE ■ Video Mute : Off ■I Front Button Lock : Off ■) PIP Demo Mode : Off ENTER for menu Menu to return Figure 2. Advanced Features menu. I IMPORTANT I Advanced Convergence (Figure 1) After adjusting the Red Convergence and Blue Convergence, you can fine-tune your TV by adjusting the Red and Blue convergence at 64 individual points. Move the flashing bracket to a position needing adjustment by pressing ▲, ▼, A, or ►. Press ENTER to select the position (flashing will stop). Move the Red or Blue line by pressing a, ▼, 4, or ►. Press VIDEO to switch between the Red and Blue lines. A position is properly converged when all three lines combine to appear white. Press ENTER to deselect the position (flashing will resume), and move the brackets to the next position needing adjustment. When completed, press MENU to save your changes, and exit the Advanced Convergence screen. Video Mute (Figure 2) Video Mute lets you display a blue or black background when no signal is being received on inputs 1-4. Front Button Lock (Figure 2) Front Button Lock lets you disable keys on the front panel to prevent access to TV functions from the front panel. PIP Demo Mode (Figure 2) PIP Demo Mode will demonstrate for you the capabilities of your TV’s Picture-In-Picture feature. When set to ON, the TV will cycle through the available PIP formats, wait 2 minutes showing only the main picture, then cycle again. You can stop the PIP demo at any time by pressing the HOME button. > Q. < ÛÎ 3 o
Телевизоры - VS-45609 (10.02 mb)
Телевизоры - VS-60719 (10.02 mb)
Телевизоры - VS-70709 (10.02 mb)
Телевизоры - VS-55609 (10.02 mb)