Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
ENTER to enter r_ MENU to go back Use the CHANNEL buttons or number buttons to select the [] Use SuperQuickView channel to add to the list. Press [] Ant-A ---[] ........ ENTER. [] ........ [] ........ [] ........ [] ........ 0 Repeat steps ([])through O [] ........ [] ........ to customize the [] ........ [] ........ SuperQuickView memory. TM I_IADJUST to select Press the MENU button to exit ENTER to enter this menu. MENU to go back 82 Chapter 3: Operating Your TV Using SuperQuickView TM (cont.) SQV adding channels directly to the list with the remote control's SQV button 0 Use the channel controls or number buttons to tune the !IV.to the channel you want to add to the list. O Press and hold the SQV buttcm for about 2 seconds. The letters "SQV" will appear under the .channel number, indicating that the channel has been added to SuperQuickView TM memory. Important: Once you've added a channel to the SQV memory, the letters "SQV" appear under the channel number any time the channel number is displayed, even if you tune to the channel in another manner. _Important: If the SuperQuickView TM memory is full, the letters "SQV" will flash when you hold the SQV button for about 2 seconds. Use the steps below and on the preceding page to replace a current SuperQuickView TM channel with a new channel or to remove existing SuperQuickView TM selections. removing channels from the list with the remote control's CANCEL button O Use steps O -O from "customizing the SuperQuickView _ list with the menus" on the preceding page to _elLectthe channel position from the SuperQuickView TM list• Press the CANCEL button on the remote control to clear the entry. You can now add a SuperQuickView _ channel to the blank entry. Using the Advanced Features _ CHAPTER FOUR Using the Special Features In addition to the basic and advanced features explained in l_he previous chapter, your TV offers some special features that you can use when operating your TV. This chapter contains the following topics: 0 Understanding the On-Screen Displays 0 Using the Sleep Timer 0 Using the Picture-in-Picture (PIP) Modes 0 Using the Active AN Network Feature * Understanding the On-Screen Displays You will see a display like this if your main source is an antenna: You will see a display like this if your main source is an input: You will see a display like this if you are using XDS: Important: Your TV provides an on-scree:n summary of the current se'_tings for the TV or cable channels, as well as the int3)rmation related to Extended Data Services (XDS). XDS allows broadcasters to supply you with the current time, channel information (such as call letters and the network name), and program information (such as the program name and program description). To view this information, press the information button (INFO) on the remote control. This setting shows: network name Ant-A023 ESPN antenna and • (A) channel Stereo & SAP numbe: _ (23) SQV QV • the channel's call letters or name A023 • stereo and SAP are available program name • channel programmed into SuperQuickView '_'memory program description • channel :is the QuiekView (QV) Thursday 10:23 am channel • PIP input source • currenL day of the week • time network name Input-1 S-VIDEO This setting shows: • the inpul_ name (Input-i) • S-video cable is connected A023 • PIP input source program name • current (lay of the week • time. program description Thursday 10:23 am This setting shows where the network name, program name and program description will appear il" t]_e broadcaster is network name supplying ;he information via XDS. This program information will only be present if the broadcaster is supplying the informa tion. program name program description The on-screen displays will automatically disappear after about 10 seconds. XDS program information will only be present if the broadcaster is supplying the information. 86 Chapter 4: Using the Special Features t Using the Sleep Timer This special feature allows you to set the TV to turr., off automati-" cally. You can set the TV to turn off after a period of time ranging from 10 to 120 minutes, in ten minute intervals. In this section you will learn: • Setting the sleep timer • Changing or canceling the sleep timer Using the Sleep Timer 87 Setting the sleep timer O Press the SLEEP button on the C)®®_ remote coat:col. The sleep timer display wi.ll appear on the " , c22_ _ b_9 screen. I_=__ Select how long you wan1; the TV to stay on by repeatedly pressing the SLEEP button. The time wi[1 decrease in 10 J_ M_SUN$_ minute intervals each tirae you press the button. When you reach the time you TV Sleep Timer 120 min. want, stop pressing the button. The sleep timer display will disappear after a few seconds. 0 To view the amount of time left in the sleep timer press the SLEEP button once. The on- screen display shows the amount of' time remaining. F>Important: During the last minute before the TV turns off, ':'Sleep Timer 1 min." will flash in red to remind you that ...
Эта инструкция также подходит к моделям:Телевизоры - VS-45501 (3.36 mb)
Телевизоры - VS-45502 (3.36 mb)
Телевизоры - VS-50501 (3.36 mb)