Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Range and bearing from own ship to the destination appears at the top of screen. This location is saved to the waypoint list as waypoint “QP01.” Navigating to multiple quick points 1. Select 35 POINT in the “selecting quick point entry method,” and return to the plotter display. 2. Press the soft key GO TO. 3. Place the cursor on an existing waypoint (soft key SELECT WPT appears) or a new location (soft key ADD QP appears). 4. Depending on the selection you made at step 3 press the soft key SELECT WPT or ADD QP. “QP<01>” appears at the cursor location. To erase last-entered waypoint press the soft key ERASE LST WPT. 5. Repeat steps 3 and 4 to complete. 6. Press the [ENTER] key to register the route. A light-blue line connects between own ship and all quick points, and it shows the shortest course to destination. Arrows on the line show the direction to follow the route. Quick points are numbered in sequential order from QP<01> and are saved to the waypoint list. Range and bearing from own ship to the first destination appears at the top of screen. The unit saves the points as a route, under the name “Q>RTE” (Quick Route). 8.2 Navigating to Waypoints (waypoint list) 1. Press the [WPT/RTE] key to open the waypoint & route menu. 2. Press the soft key WAYPOINTS to open the waypoint menu. 3. Press the soft key LOCAL LIST or ALPHA/ NUMERIC LIST to show corresponding waypoint list. 4. Select a waypoint. 5. Press the soft key GO TO. The plotter display appears. A light-blue line runs between destination selected and own ship’s position. Arrows on the line show the direction to the follow. Waypoint data appear at the top of screen. 8.3 Navigating to Ports, Port Services Some Nav-Charts™ mini chart cards have a port service list which shows services available at ports or harbors. (See page 3-4.) You can use the list to set destination as follows: 1. Press the [MENU] key to open the main menu. 2. Press the soft key DISPLAY OPTIONS. 3. Press to select SET GO TO METHOD and press the soft key EDIT. The SET GO TO METHOD window appears. 4. Press the or to select WPT/PORT SER and press the [ENTER] key or the soft key ENTER. 5. Press the [PLOT] key to return to the plotter display. 6. Press the soft key GO TO. Soft key titles change as in Figure 8-2. DGPS 3D CANCEL GO TO FROM OS 0.26 nm 180.2° QUICK ROUTE NEAR SRVICE PORT GO TO PUNTA CORNACCHIA ACCO AMENO I. ISCHIA CASAMICCIOLA ISCHIA PORTO 40°45.971’N 13°57.462’E+ Figure 8-2 Plotter display 7. Press the soft key PORT or NEAR SRVICE soft key depending on objective. PORT shows a list of ports in your area. NEAR SRVICE displays the port service list. SELECT PORT s ACCIAROLI ACQUAMORTA AGNONE S. NICOLA AGROPOLI AMALFI BAIA CAPRI CASA MICCIOLA-ISCHIA Figure 8-3 Sample port list (southern Italy) SELECT PORT SERVICE ' ™ ™ ™ ™ ™ ™ ™ Figure 8-4 Sample port service list 8. If you selected PORT in step 7, use the cursor pad to select a port and press the [ENTER] key. Make a route using the soft keys and press the [ENTER] key. (If you want to go directly to that port, simply press the soft key ADD QP followed by the [ENTER] key.) If you selected NEAR SERVICE in step 7, select service mark desired and then press the soft key ENTER. Then, the display shows the locations of those services nearest you. (Figure 8-5 shows location of filling stations in an area in southern Italy.) Use or to place the “hand cursor” on the port service icon desired and press the soft key ENTER. Make a route using the soft keys and press the [ENTER] key. (If you want to go directly to location selected, simply press the soft key ADD QP followed by the [ENTER] key.) 40°45.971’N FROM 0.26 nm GO TO + 13°57.462’E OS 180.2° DGPS 3D CANCEL GO TO ENTER PUNT CORNACCHIA ACCO AMENO I. ISCHIA CASAMICCIOLA ISCHIA PORTO Figure 8-5 Sample filling station locations (southern Italy) 8.4 Following a Route 1. Press the [WPT/RTE] key followed by the soft key ROUTE to open the route list. 2. Press or to select a route. 3. Press the soft key GO TO to show the plotter display. DGPS 3D WPT FROM OSFISH 1.3 nm 208.5° WP-002 WP-001 FISH CRAB GO TO ROUTE RETURN ZOOM IN ZOOM OUT GO TO WPT RVSE ROUTE Figure 8-6 Plotter display, route selected as destination The cursor is on the route waypoint nearest own ship. 4. Operate the cursor pad to place the cursor on the waypoint or leg desired in the route. 5. Press the software key GO TO WPT or FOLLOW LEG (depanding on the choice at step 4). Green lines connect all route waypoints and arrows on the lines point in the direction to traverse the route. Navigate route waypoints in reverse order Press the soft key RVSE ROUTE to reverse the order to traverse waypoints. The arrows on the route line point in direction selected. Navigate directly to a route waypoint If you want to go directly to a route waypoint, place the cursor on the waypoint to show the flashing diamond, and then press the soft key GO TO WPT. Navigate along specific leg of route Place the cursor on the leg to display it in a w...
Эта инструкция также подходит к моделям:Телевизоры - GP-1650F (931.79 kb)