Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
If you turn an input Off, it will be skipped when you press DEVICE on the remote control. Choices are: B ANT-A, ANT-B: On or Off B DTV: Y/Pb/Pr, RGB, RGBHV or Off B COMPONENT Cycle through a list of preset names or Off B INPUT-1, INPUT-2, INPUT-3: Cycle through a list of preset names or Off B MonitorLink (MONLINK) Cycle through a list of preset names or Off 35 SETUP Menu: NetCommand® IR Setup, Language, IR Device Setup Menus (WS-48413, WS-55413, WS-65413) NetCommand IR Setup Menu (Figure 12) For simple control with the Mitsubishi TV remote, select the NetCommand IR SETUP from the SETUP menu screen. There are 3 basic steps to the NetCommand IR Setup: 1. Select the devices that are connected to the TV (Net Command IR Device Setup Menu) 2. Have the TV learn the device’s remote control keys (NetCommand IR [Device] Learn menu) 3. Select or change the Input(s) the device(s) is (are) connected to (NetCommand IR Input Assignment Menu) Language (Figure 13) On initial set up, before you can use the NetCommand IR Menus, the language for the menu screens needs to be selected. Your choices are English or Spanish (Español). NOTE: This Language screen only appears on initial TV setup. To change the language later, select Language from the SETUP Menu screen (page 41). MAIN MENU SETUP menu Memorize Channels : Ant-A . Air 1 NETCOMMAND® IR SETUP 1 CLOCK Language : English (Idioma) Energy Mode: : Standard ENTER for menu MENU to return Figure 12. SETUP Menu, NetCommand® IR MAIN MENU SETUP MENU Welcome to NetCommand® IR Language (Idioma) NETCOMMAND® IR Press ENTER to begin. NetCommanci^lR automatically switches the input on the TV and AV Receiver. Press MENU to cancel or setup later. NetCommand IR Menu (Figure 14) Select NetCommand IR to start the TV learning process. 1. NetCommand IR Device Setup Menu (Figure 14) Using the Adjust buttons, select Yes for each device (AV Receiver, Cable, DTV, etc...) you have connected to the TV. After selecting Yes, press ENTER to have the WS-48413, WS-55413 or WS-65413 go to the Learn menu to start learning the device. NOTE: If you connect a cable box with an RF output other than channel 3, please see the Channel Edit Menu on page 45. 36 Figure 13. NetCommand® IR Menu, Language NetCommand IR Device Setup menu CbCEC(AV Receiver) i Y CabCe i N Cam (corder) i N DBS (Satellite) i N VCR Other CONTINUE SETUP (press ENTER) Select Yes if you have the device, No if not. Press ENTER to configure the device. Figure 14. NetCommand® IR Device Setup Menu SETUP Menu: NetCommand® IR [Device]Learn Menus (WS-48413, WS-55413, WS-65413) NOTE: You will need both the television remote and the device’s remote to perform the Learn Menu functions. 2. NetCommand IR [Device] Learn Menu ,NET (dtmgftd O o [Q [O □ U □ u u NetCommand1"'' IR AVR Learn menu POWER(ON) DIG! POWER OFF MUTE VOLUME UP VOLUME DOWN Rename INPUT 1 | m\ INPUT INPUT 2 INPUT INPUT 3 ^ INPUT INPUT 4 ^ INPUT Continue Setup(press ENTER) DIGITAL/ANALOG MUTE Rename Input INPUT 1 INPUT 2 INPUT 3 INPUT 4 Press ENTER to learn POWER key for AV Rec. Press POWER on AVRec remote until * shows. To check, press POWER key on TV remote. Figure 15. AVR (AVReceiver) Learn Menu Press ENTER to learn POWER key for Cable. Press POWER on Cable remote until * shows. To check, press POWER key on TV remote. Figure 16. Cable Learn Menu NetCommand IR AVR Learn Menu (Figure 15) NetCommand IR Cable (DTV, DBS Learn Menu (Figure 16) NetCommand IR DVD Learn Menu (Figure 17) NetCommand IR VCR Learn Menu (Figure 18, page 38) On the NetCommand IR [Device] Learn menu, for each control (Power, Volume, etc... ) on the NetCommand IR [Device] Learn Menu, use the Adjust buttons on the TV remote to highlight the control you want the TV to learn. Depending on the device, different control buttons will be available. Press ENTER to have the TV highlight and prepare to learn the device’s individual control button. The highlighted button will start flashing. While it flashes, press the corresponding button on the device’s remote. An asterisk (star) will appear on-screen next to the control button name when the code is learned. To verify, press the POWER button on the TV remote to see if the device responds. After the device responds, press ENTER to return to the NetCommand IR Device Setup Menu to select the next device to learn. (o Q □ □ O (□ (□ Q □ (□ Q O a o Learn menu SKIP FRWD SKIP BACK ADJUST UP ADJUST DOWN Press ENTER to learn POWER key for DVD. Press POWER on DVD remote until * shows. To check, press POWER key on TV remote. Figure 17. DVD Learn Menu When all the devices are learned, select CONTINUE SETUP (ENTER) on the NetCommand IR Device Setup Menu to go to the NetCommand IR Assignment Menu. NOTE: If the asterisk does not appear, start the learning process again. If it does not work, your device may not be compatible to be “learned” by NetCommand. NOTE: To de...
Эта инструкция также подходит к моделям:Телевизоры - ws-48413 (4.66 mb)
Телевизоры - ws-48413 (4.66 mb)
Телевизоры - ws-55413 (4.66 mb)
Телевизоры - ws-48413 (4.66 mb)