Оценок - 3, средний балл: 4.3 ( )

Производитель: Hitachi Размер: 13.34 mb Название файла: Язык инструкции:

The volume level will be displayed on the TV screen. These buttons also serve as the cursor left («() and right (►) buttons when in MENU mode. (4) CHANNEL selector Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down {▼) and up (A) buttons when in MENU mode. (5) POWER button Press this button to turn the TV on or off. ur HITACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1, 2, or 3 is selected. @ POWER light You will see a red light when the TV is turned on. (?) AI (Artificial Intelligence) sensor The Artificial Intelligence sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. (See page 49.) ® REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc. (9) MAGIC FOCUS Use this button to adjust your picture quality to optimum performance. (See page 40.) ® FRONT INPUT JACKS (for VIDEO: 3) Use these audio/video jacks for a quick hook-up from a camcorder or VCR to instantly view your favorite show or new recording. Press the INPUT button until VIDe6: 3 appears in the top right corner of the TV screen. If you have mono sound, insert the audio cable into the left channel jack. Check the Power Light to make sure the TV is turned off when not in use. To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds. Press the POWER button on the TV again to end the auto-demonstration. 9 FRONT PANEL JACKS AND CONNECTIONS The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: S-VHS Video camera OUTPUT INPUT NOTE: Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable. If you have mono sound, insert the audio cable into the left channel jack. 10 'jJj Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.) The antenna output labeled “TO CONVERTER” allows the ANT A connection to pass directly to a different source such as a cable box, when ANT E3 is displayed as a main picture. (2) Audio/Video Inputs 1, 2 The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, etc, (if you have mono sound, insert the audio cable into the left channel jack.) (3) Monitor Out These jacks provide fixed audio and video signals which are used for recording. (?) Wireless Out These jacks provide variable audio output to a set of wireless speakers. They can also be used for another stereo system amplifier. With this connection, the audio can be controlled by the television’s main volume and also by an independent volume feature found in the THEATER-WIRELESS SOUND menu, » 5j A'jdio to Hi-Fi These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the television’s main volume. Use these jacks for the SURROUND Left and Right channels. (See page 17.) (§J> Rear Speaker Terminals These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the television’s main volume and also by an independent rear volume feature found in the THtATER-SURROUND menu. Use speakers with 8-Ohm impedance only. \7j S-Video inputs 1 and 2 Inputs 1 and 2 provide S-Video (Super Video) jacks for connecting equipment with S-Video output capability. (§) Sub Woofer This jack provides variable output to a sub-woofer accessory. With this connection, the audio can be controlled by the television’s main volume and also by an independent sub-woofer volume feature found in the THEATER-SUB WOOFER menu. 11 REAR PANEL CONNECTIONS o CZZZID o O a r. j—j 0 o u Ü o o K-J '¡ZZZII^nS’ o Stereo System Amplifier VCR #2 V Wireless Speaker Wireless Speaker Transmitter Typical full feature setup. Follow connections that pertain to your persona! entertainment system. 12 "SîtAR SPfcftKIR \hPL CONNECTIONS CONNECT AFTER TURNING THE POWER TO THE TV OFF. Press the Right Speakerhl iitnn anf* '™arl »he positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to oric me is locked into place, in the same manner, press the Right Speaker black button and insert the negative (-) Seat >cedure for the Left Speake...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: