Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
The Review screen shows all devices connected to the TV, including IEEE 1394 devices. MainPicture Transport Menu Figure 14 NetCommand uses the Transport menu to control VCRs, DVDs, IEEE 1394 AV Discs, digital VCRs, and similar devices. If you choose to turn off this menu when viewing the devices, the transport buttons (rewind, play forward, stop, pause and record) on the TV’s remote control will continue to operate these devices. In the Device Selection menu selecting a VCR or DVD Player will automatically display the Transport menu. Re-display this menu by pressing DEVICE MENU. Select Transport menu functions by pressing ADJUST or and then ENTER. For example, to pause playback, press ADJUST or to move to PAUSE, then press ENTER. If a function is not possible, such as record for a DVD Player, the Transport menu button will be grayed out. Figure 14. Transport Menu Figure 15. Icon Order Menu Antenna Menu Antenna Menu Figure 16 Antenna Menu The Antenna Menu options are available for use with analog and digital channels on Antenna-1 and Antenna- 2. You can memorize, add or delete, name and add channels to an SQV (Super Quick View™) list. Memorize For Antenna-1 (Main) or Antenna-2 (Aux) Select either Air (when used with an indoor/outdoor antenna) or Cable (when used with direct cable) then press ENTER to start the automatic channel memorization process. If a CableCARD is being used, memorized channels are provided by your cable provider through the CableCARD. To stop the automatic channel memorization process, press CANCEL. Channels memorized before you pressed CANCEL are retained in memory. After memorizing channels, the channels in the memory can be accessed in ascending or descending order or by pressing CH or . The memorization will occur twice, as the TV memorizes analog and digital channels separately. Prefer Digital If a memorized channel is shown both as an analog and digital channel, a check mark in the Prefer Digital box will show the digital and hide the analog channels, when using CH. Removing the checkmark will show both analog and digital choices. Channel For additional Channel editing, press ADJUST or to select the channel or press CH or for channels already in memory. Channels can also be selected by using the number buttons. To immediately tune to the listed channel, press ENTER after entering the number(s). For digital channels, when the broadcaster has sent a virtual channel number, the virtual channel number is shown in the text box and the original digital channel is shown below on-screen, as a reference. Press SUB on the remote to enter a separator for digital numbers. Memory After the available channels have been memorized with Memorize, weaker channels can be added. Unwanted channels can also be deleted. Press CH or on the remote control to see the channels in memory. Press ADJUST or to select Added or Deleted for the channel shown in the Channel number box. Name Analog channels shown on Antenna-1 or Antenna-2 can be named (up to four characters). After you enter a name, it will appear on the TV screen, next to the channel number. 1. Press ADJUST or to select each letter. 2. Press ENTER to set the letter and move to the next letter position. 3. Press CANCEL to move back one position. Digital channels are automatically named if the broadcaster sends the information. Figure 16. Antenna Menu Antenna Menu, continued SQV (SuperQuickView™) Using The Menu Screen Figure 17 SQV (SuperQuickView™) allows you to put together lists of your favorite channels from Antenna-1 and Antenna-2. You can store channels in any of the 9 different SQV memory banks. You can also store the same channel in multiple memory banks. Once you have added a channel to an SQV memory, “SQV” and the memory bank number will appear under the tuned channel number on the TV screen. Adding SQV Channels 1. Select the channel by pressing ADJUST or using the Channel text box or press CH or . 2. Highlight the bank (SQV1-SQV9). 3. Press ENTER to check mark the selected SQV memory bank. 4. Repeat for additional channels or banks. Removing SQV Channels 1. Highlight the box for the SQV bank number. 2. Press ENTER to remove the checkmark. SQV (SuperQuickView™) Using The Remote Control Adding SQV channels using the remote control: 1. Press CH , or number buttons to select the channel you want to add to the current SQV memory bank. 2. Press and hold the SQV button for about 2 seconds. When “SQV” and the memory bank number appear under the channel number, the channel has successfully been added. Removing SQV channels using the remote control: 1. Press the SQV button and then the memory bank number. 2. Press the SQV button repeatedly until you see the desired channel. 3. While the channel number and SQV indicator (with correct bank number) are still displayed on the screen, press CANCEL. If the CANCEL button is not pressed before the SQV indicator disappears automatically, the channel will not be removed. 4. When the SQV indicator disappears, t...
Эта инструкция также подходит к моделям:Телевизоры - WS-48515 (3.74 mb)
Телевизоры - WS-48515 (3.74 mb)
Телевизоры - WS-55515 (3.74 mb)
Телевизоры - WS-55615 (3.74 mb)