Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Out port. 2. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. 3. Set the “ TV Speaker option -Off” in the AUDIO menu. Refer to page 33. See the external audio equipment instruction manual for operation. Caution: Do not look into the optical output port. Looking at the laser beam may damage your vision. S-VIDEO MONO (L) (R) AUDIO VIDEO AV IN 1 AV OUT DIGITAL AUDIO OPTICAL OUT HDMI /DVI IN Owner’s Manual 17 18 DLP Projection TV PC Settup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic card accordingly. AUDIO RGB-PC OUTPUT RGB (PC/DTV) PR PB Y RGB IN COMPONENT IN 1 2 (L) (R) AUDIO RGB/DVI (L) (R) SERVICE ONLY VIDEO AUDIO AUDIO DVI-PC OUTPUT RGB (PC/DTV) S-VIDEO RGB IN (L) (R) AUDIO RGB/DVI (L) (R) AUDIO VIDEO AV IN 1 AV OUT DIGITAL AUDIO OPTICAL OUT HDMI /DVI IN MONO When supporting DVI How to connect 1. Connect the PC to HDMI/DVI port of this TV with an HDMIto- DVI cable(not supplied with this product). 2. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How To Use 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Select HDMI/DVI input source in main input option of SETUP menu. INPUT button is also available for this purpose. - Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or bright ness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, adjust Phase Calibration using the ADJUST button or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. How to connect 1. Connect the PC to RGB INPUT port of this TV with a RGB cable. 2. If the PC(or the sound card of the PC) has an analog audio out-put connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How to use 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60 Hz. 2. Select RGB-PC input source in main input option of SETUP menu. Once you select RGB-PC in main input option of SETUP menu, INPUT button is also available for this purpose. When supporting RGB Notes: -Depending on the graphics card, DOS mode may not work if a HDMI1 to DVI Cable is in use. -When Source Devices connected with HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position and Size may not fit to Screen. As shown the picture below, press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center. -When Source Devices connected with HDMI/DVI Input, output TV SET Resolution(480p, 720p, 1080i) and TV SET Display fit EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center. -In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "No signal" OSD dis-play in HDMI/DVI Input. In case that Video Resolution is not supported TV SET output in HDMI/DVI Source Devices, "Invalid Format" OSD display. Refer to the Manual of HDMI/DVI Source Devices or contact your service center. Monitor Display Specifications (RGB-PC or HDMI/DVI Mode) Resolution 640x480 800x600 1024x768 640x350 Horizontal Frequency(KHz) 48.363 56.476 60.023 35.156 37.879 48.077 46.875 31.468 31.469 37.861 37.500 Vertical Frequency(Hz) 56.25 60.31 72.18 75.00 60.00 70.06 75.02 70.09 59.94 72.80 75.00 RGB-PC Mode Only Owner’s Manual 19 Screen Setup for PC mode OperationOperation • When RGB connect to PC input and select the RGB-PC in Main Input, this function is used. • In RGB-PC mode, POSITION, SIZE, PHASE, RESET is available. • In RGB-DTV mode, SIZE, PHASE is not available. • In HDMI/DVI mode, POSITION, SIZE, RESET is available (When PC format is inputted) or any function is not available (When DTV format is inputted). Adjustment for screen Position, Size, Phase, ResetAdjustment for screen Position, Size, Phase, Reset •After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality. -Display PC Adjust Menu using ADJUST button. -Position : Adjust the screen position. After displaying the Adjust, select the screen position. -Size : Adjust the screen size. -Phase : Adjust the phase of Pixel clock. -Reset : Initializating Size, Position, Phase adjustment . Close POSITION GG SIZE PHASE RESET Adjust DD FF GG EE Close POSITION SIZE GG PHASE RESET Adjust DD FF GG EE Previous POSITION SIZE PHASE RESET Adjust DD FF GG EE Move Previous POSITION SIZE PHASE...
Эта инструкция также подходит к моделям:Телевизоры - Z52DC2D (2.97 mb)
Телевизоры - Z62DC1D (2.97 mb)