Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Highlight Reorder. Then, select the channel you wish to reorder and press OK to confirm. Move to the right channel number and press OK to reconfirm. Select OK and press MENU to exit. Reordering for channels 1 2 3 4 12 Re-scan for channels The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please follow the steps below: Press the MENU key on the remote control to bring up the OSD. Use the directional keys to navigate and select Channel Management. Highlight Auto Scan. Then, select Start and press OK to begin. or Highlight Manual Scan. Then, select Scan up, Scan down or Scan for updates and press OK to begin. Select OK and press MENU to exit. Scanning for channels English 13 English Widescreen display mode Your Acer LCD TV has a special widescreen mode that allows you to toggle between Auto, 4:3, 16:9, Panorama, and Letterbox 1, 2 and 3 type views. Press the WIDE key on the remote control to toggle the display between the four wide modes. Wide mode The Acer LCD contains four widescreen modes, including Auto, 4:3, 16:9, Panorama, and Letterbox 1, 2 and 3. Auto In this mode, TV will auto detect picture source and fit in suitable size. 4:3 For 4:3 standard pictures. A side bar appears on each side. 16:9 For 16:9 standard pictures. A side bar appears on each side. Panorama In this mode, the picture is progressively stretched toward each side of the screen. Letterbox 1, 2 and 3 In this mode, the picture is enlarged linearly to fit the screen. The top and bottom portions of the picture may be cut off. WIDE 14 Troubleshooting Before you call the Acer service center, please check the following items: Here is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each. There is no picture or sound. • Make sure the power cord is properly inserted in the power outlet. • Make sure the input mode is correctly set by your selected input. • Make sure the antenna at the rear of the TV is properly connected. • Make sure the main power switch is turned on. • Make sure the volume is not set to minimum or the sound is not set to mute. • Make sure the headphones are not connected. • Make sure the internal speaker is set to ON. • Reception other than those of broadcasting stations can be considered. Picture is not clear. • Make sure the antenna cable is properly connected. • Consider whether your TV signal is being properly received. • Poor picture quality can occur due to a VHS camera, camcorder, or other peripheral being connected at the same time. Switch off one of the other peripherals. • The 'ghost' or double image may be caused by obstruction to the antenna due to high-rise buildings or hills. Using a highly directional antenna may improve the picture quality. • The horizontal dotted lines shown on the pictures may be caused by electrical interference, e.g., hair dryer, nearby neon lights, etc. Turn off or remove these. Picture is too dark, too light or tinted. • Check the colour adjustment. • Check the brightness setting. • Check the sharpness function. • The fluorescent lamp may have reached the end of its service life. Remote control does not work. • Check the batteries of the remote control. • Make sure the remote sensor window is not under strong fluorescent lighting. • Try to clean the remote control sensor lens on the TV with a soft cloth. • Use the buttons (hotkeys) on the TV before the remote control works. If the above suggestions do not solve your technical issue, please refer to the warranty card for service information. English 15 PC Input Signal Reference Chart English 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Resolution 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1280 x 768 1280 x 720 1280 x 720 1360 x 768 1360 x 768 Horizontal Frequency (kHz) Vertical Frequency (Hz) Standard Format 31.5 70.0 VGA 31.5 70.0 VGA 31.5 60.0 VGA 35.0 66.7 MAC 37.9 72.0 VESA 37.5 75.0 VESA 43.3 85.0 VESA 35.2 56.0 VESA 37.9 60.0 VESA 48.1 72.0 VESA 46.9 75.0 VESA 53.7 85.0 VESA 49.7 74.5 MAC 48.4 60.0 VESA 56.5 70.0 VESA 60.0 75.0 VESA 47.8 59.9 VESA 44.8 59.9 VESA 16:9 56.5 74.8 VESA 16:9 47.7 59.8 VESA 16:9 60.3 74.9 VESA 16:9 1). The PC input does not support Sync on Green or Composite Sync. 2). The PC input does not support interlaced signals. 16 EnglishProduct specifications Model AT2621 AT3221 AT4221 Panel spec Resolution (pixels) 1366 x 768 Brightness (tpe.) 500 nit Contrast Ratio (tpe.) 800 : 1 1500 : 1 Display colour 16.7 M Viewing angle (tpe.) H: 160o ; V:160o H: 178o ; V:178o Response (tpe.) 8 ms (Gray to Gray) 6.5 ms (Gray to Gray) 8 ms (Gray to Gray) Power supply Input 100 to 240 V AC (50~60 Hz) Max. power consumption 161 W 185 W 291 W Power saving <2 W Mechanical Dimensions (W x H x D mm) 693 x 529 x 195 814 x 610 x 261 1071 x 794 x 311 Weight (kg) 12.08 ...
Эта инструкция также подходит к моделям:Телевизоры - AT2621, AT2622 (2.5 mb)
Телевизоры - AT3221, AT3222 (2.5 mb)