Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
;for■ . more connection information. Please see page 54 for more information on the POP . : feature.. .......... : ...... : : ...... : ... : ...... : 14 Connections Connecting a DVD Player, DTV Decoder, and D-VHS Your AV-56WP30 or AV-48WP30 television is HDTV and SDTV-Ready. This means it can display High Definition television images when connected to a digital television receiver*. DTV Decoders are available separately. For best image quality, we recommend using a DTV Decoder which uses Component Video (Y, PB, PR) Output to connect to the television. The diagram below shows how to connect a DTV Decoder with using the television’s Component Video-in jacks. 1) Connect Green cable out from the DTV Decoder “Y” Video Output, in to TV “Y” Component Input. 2) Connect Blue cable out from the DTV Decoder “PB” Video Output, in to TV “PB” Component Input. 3) Connect Red cable out from the DTV Decoder “PR” Video Output, in to TV PR” Component Input. 4) Connect White Audio cable out the DTV Decoder Left Audio Output, in to TV Left Audio Input. 5) Connect Red Audio cable out the DTV Decoder Right Audio Output, in to TV Right Audio Input. Make sure you use the same numbered input for both the Component Input and Audio Input. For instance, if you use Component Input 2, also use Audio Input 2. • Green, blue and red are the most common colors for Component Video cables. Some models may vary colors, please consult the user’s manual for your DTV Decoder for more information. • Be careful not to confuse the red Component Video cable with the red audio cable. It is best to complete one set of connections (Audio or Video) before starting the other to avoid accidentally switching the cables. Notes. About'HDW .Operation ■ ■ : ■ ' ' The.AV-56.WP30 or AV-48.WR30 can display.'480p, 480i, 1080i and 720p signal formats using the Component. Video Inputs.' It cannot .display 1.080p. signal. For High Definition'.: (HDTV) .picture display a DTV decoder must be connected to the TV........ 15 Connections Connecting to a Digital TV Receiver w/HDCP By inputting a high bandwidth Digital Content Protection High Definition picture source to the Digital-in terminal of this television, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future when high bandwidth Digital Content Protection DTV decoders and DVD players and D-VHS are put on the market.) 1) Connect the DTV digital RGB output terminal to the digital input terminal of the television, and then tighten the 2 screws. 2) Connect the DTV decoder left audio output to the DIGITAL-IN left audio input. 3) Connect the DTV decoder right audio output to the DIGITAL-IN right audio input. • The Digital-in terminal can only be used with 1080i, 720p and 480p picture signals. Set the DTV decode Digital-Out terminal output setting to 10SOi, 720p or 480p. For detailed information, refer to the DTV decoder instruction manual, if you can not display the picture because your DTV decoder does not have a Digital-Out terminal output setting, use the component Video Input (or the S-Video Input or Video Input). (Refer to page 15) In this case the picture will be displayed as an analog signal. • The Digital-in terminal is not compatible with the picture signal of a persona! computer. • Use a DVI-D Single Link 19-pin cable (commercially available) in order to digitally connect the television with a DTV decoder. If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. In cases such as this, the horizontal balance can be adjusted by accessing “DIGITAL-IN” in the INITIAL SETUP Menu. (Refer to page 41.) 16 Connections Connecting a DVD Player You can use the Component Video input jacks to connect a DVD player to your television. To connect a DVD player, please follow the steps listed below. 1) Connect Green cable out from the DVD Player “Y” Video Output, in to TV “Y” Component Input. 2) Connect Blue cable out from the DVD Player “PB” Video Output, in to TV “PB” Component Input. 3) Connect Red cable out from the DVD Player "PR” Video Output, in to TV PR” Component Input. 4) Connect White Audio cable out the DVD Player Left Audio Output, in to TV Left Audio Input. 5) Connect Red Audio cable out the DVD Player Right Audio Output, in to TV Right Audio Input. Make sure you use the same numbered input for both the Component Input and Audio Input, For instance, if you use Component Input 3, also use Audio Input 3. • Green, blue and red are the most common colors for Component Video cables. Some models may vary colors, please consult the user’s manual for your DVD Player for more information. • Be careful not to confuse the red Component Video cable with the red audio cable. It is best to complete one set of connections (Audio or Video) before starting the other to avoid accidentally switching the cables. • If your DVD player does not have a Component Video output, you ...
Эта инструкция также подходит к моделям:Телевизоры - AVO48WP30 (5.14 mb)