Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
S3125A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Information for USA This device complies with Part 15 of the FCC Rules. Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR LE CANADA) This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe [B] est conforme a la norme NMB-003 du Canada. The lightning flash with arrowhead symbol, within an equi-lateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” Due to design modification, data given in this instruction book within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. are subject to possible change without prior notice. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruc- tions in the literature accompanying the appliance. Precaution This equipment is intended for indoor use only. Do not use it outdoors or at places that are exposed to rain or moisture. Do not attach devices other than TK-C625U/E, TK-C655E, TK- C676E, TK-C205(A)U/E, TK-C205VP(A)U/E, VN-C625U and VN-C655U to this mount/bracket. The suffix E of model No. specifies the exclusive variant for European market. Install this mount/bracket horizontally. Do not tilt it during use. Do not install or use the unit in the following places. • In a place exposed to rain or moisture. • In a temperature outsside the operating temperature range (–10.C to 50.C (14.F to 122.F)). • In a place where corrosive gasses are generated. • In a place subject to vibration. When attaching VN-C625U, VN-C655U to this mount/bracket, please refer to the "INSTRUCTIONS" section of VN-C625U, VN- C655U for procedures to install the converter unit. Please refer to the "INSTRUCTIONS" section of the camera in use for procedures to attach the camera. Installing the Converter Unit When using VN-C625U or VN-C655U, attach using the clamping bracket inside the top cover of the converter unit (supplied with the camera). Top cover Converter Unit Clamping Bracket Precaution This equipment is intended for indoor use only. Do not use it outdoors or at places that are exposed to rain or moisture. Do not attach devices other than TK-C625U/E, TK-C655E, TK- C676E, TK-C205(A)U/E, TK-C205VP(A)U/E, VN-C625U and VN-C655U to this mount/bracket. The suffix E of model No. specifies the exclusive variant for European market. Install this mount/bracket horizontally. Do not tilt it during use. Do not install or use the unit in the following places. • In a place exposed to rain or moisture. • In a temperature outsside the operating temperature range (–10.C to 50.C (14.F to 122.F)). • In a place where corrosive gasses are generated. • In a place subject to vibration. When attaching VN-C625U, VN-C655U to this mount/bracket, please refer to the "INSTRUCTIONS" section of VN-C625U, VN- C655U for procedures to install the converter unit. Please refer to the "INSTRUCTIONS" section of the camera in use for procedures to attach the camera. Installing the Converter Unit When using VN-C625U or VN-C655U, attach using the clamping bracket inside the top cover of the converter unit (supplied with the camera). Top cover Converter Unit Clamping Bracket Installation Procedures These installation should be made by a qualified service person and should conform to all local codes. These installation should be in accordance with the National Electrical Code ANSI/NFPA 70. Use the appropriate mounting hardware for the surface selected. WB-S621U Pendant Mount When a hole is not Reinforcement Angle Camera Mounting Plate Ceiling Panel Assy (for attaching TK-C625U/E and VN-C625U) 3. 1. 2. 5. made in the ceiling 4. Fall prevention FRONT Mark Protruding Part Ceiling Panel Assemb ly Positioning Hole Front Mark Top cover Bolt (M4) Safety cable Mount Hole ( 4.5 mm) Nut (M4) Groove Cable Safety cable Cables Screws (3 locations) 1.Make a hole in the ceiling. To route cables through the ceiling, make a hole of 30 mm ( 1 1/4) in the ceiling. 2.Route the safety cable and other cables Route the safety cable and cables that is attached to the reinforcement angle through the pendant mount. When a hole is not made in the ceiling, route the cables through the groove of the pendant Mount. 3.Mount the Pendant Mount to the Ceiling. Attach the pendant mount to the ceiling. CAUTION The camera may drop or images on the screen may appear shaky if the ceiling material is not strong enough. In this case, reinforce using a reinforcement materials. 4.Connect the safety cable. Upon removing the camera mounting plate, attach the safety cable (not supplied) to the safety cable mount hole ( 4.5 m...
Эта инструкция также подходит к моделям:Телевизоры - WB-S621U (136.99 kb)
Телевизоры - WB-S622U (136.99 kb)