Оценок - 2, средний балл: 4.5 ( )

Производитель: AOC Размер: 471.54 kb Название файла: Язык инструкции:

. Antenna To display RF antenna mode. . Time/ Off Time The function of can be effectual only when Time/ Off Time is not off. Press the number buttons and .Vol+./.Vol-.to adjust the time. Press.CH+./.CH-.to select these options in Clock such as Time.Channel.Off Time in cycle, Press.Vol+./.Vol-.to set the corresponding value. 1 Whenever the main power is on, the clock item always displays “12:00AM”,only use .Vol+./ .Vol-.to switch between AM and PM and use numeric buttons to modify the time. 2.To set Time/Off Time among Off/Once/Always with .Vol+./.Vol-.in cycle. Off indicates this function is not available. Once indicates one time for On Mode, after then it would be adjusted to Off automatically. 3.This function can only be available when the main power supply is proper, otherwise, it can not be done and automatically adjusted to Off. 4. Of Clock.Time and Off Time, “Minute”ranges from 00 to 59,“Hour”is 1~12(AM), PAGE 14 1~12(PM).When“Hour”turns to “--” “Minute”also turns to “--” accordingly, the function of Clock stops. . Channel Select the Channel in Air from 2 to 69 or Cable from 1 to 125 by pressing .Vol+./ .Vol-. circularly or numeric buttons directly; Select the items circularly by pressing .CH+./.CH-.. 1.When TV is on, it turns directly to the preset channel if the preset Time is on; When TV is in standby mode, it firstly turns on and then goes to the preset channel If the preset Time is on. 2.When the TV is on , if the value of On Time and Off Time are the same, only Off Time is valid; When the TV is off, if the value of On Time and Off Time are the same, only On Time is valid, 3.Restart the TV after shutting off the main power, all settings are to be initialized; Turn off the TV using the remote control, all settings are to be saved. Note: Only in standby mode can this TV be turned on automatically. The Clock menu in other signal sources is the same to that in TV mode. . PC Setup . H Position To adjust picture’s start horizontally. . V Position To adjust picture’s start vertically. . Clock To adjust pictures’ sampling clock . . Phase To adjust pictures’ sampling phase . Colour Temp Four modes of Warm.Normal.Cool And User to choose with .Vol+./.Vol-.in cycle. Only in User mode can adjustments be made to the three options: User Red.User Green and User Blue. . Auto Adjust To adjust the picture’s start .clock.phase and color temper to the appropriate value (invalid in DOS mode). Note: The PC Setup menu is only available in the PC signal source. . Volume Control 1. Press.Vol+. /.Vol-.to increase or decrease the volume when there is no menu on the screen. The Volume menu will be auto off if there is no operation about 6 seconds. 2. Press.MUTE.on the remote control to turn On/Off the MUTE mode. In Mute mode, a sign of“MUTE” in red will appear on the upper-right corner of the screen. This sign is hidden when the menu operation is entered, but the feature is still valid. It appears again OTHER FUNCTIONS PAGE 15 when the menu operation is exited. When there is no valid signal input, the TV will be mute (but no mute sign) 3. MTS . Capable of identifying MTS automatically with the control status: the TV would memorize SAP after it is auto identified: the TV would memorize Stereo after it is auto identified; . There is an OSD hint to show the changes in broadcasting signals: . Press .MTS.to switch between Stereo /SAP 4. Sound Mode Selection Press .SOUND.to select Personal.News.Theater and Music modes and activate the Sound Mode. TV will enter into the Personal mode as you want to alter the concerned options of the Sound Menu in any mode. Sound Mode Sound Quality Personal For the user’s preference News For general programs of conversations and news report Theater For better audience effect as soft.magnificent and vivid Music For general music programs Note: The operation and setting of the Volume Control are applicable to all the signal sources. a) Picture Mode Selection Press.PIC.to Switch among Personal, Soft, Normal and Rich modes. Picture Mode Picture Quality Personal For the user’s preference Soft For more mellow pictures Normal For general programs Rich For better visual effect such as magnificent and vivid Note: The setting of this selection is applicable to all the signal sources. Mono Stereo SAP PAGE 16 . CCD Press .CC.to see this menu, you can select the desired option among CC1~CC4.T1~T4 and OFF with .CH+./.CH-., and confirm that by pressing.OK. .. Favorites Press .FAVOR.to see this menu on the right, these are the details: 1. Mode:including Auto and Manual. They are respectively stored in Air or Cable way; 2. In Auto mode,the TV would store the available channel name input with the numeric buttons to Favorite Channels every time orderly, what is more, it only save the latest five channel names of availability (without repeat); 3. In Manual mode,select different Sort with.CH+./.CH-., then you can channel of each sort by .CH+./.CH-.or number buttons( in Air way, 2-69 are available; in Cable way, 1-125 ar...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: