Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
16 Watching Digital Broadcasts Press the Power Buttons • Press the Power buttons of the PDP and the Receiver. 2 Connect a Digital Broadcasting Receiver to the PDP • Prepare A/V Cables supplied. • Connect the cables from the Digital TV Receiver output terminal to the PDP(Component 1, 2) input terminal. • When connecting the cables, be sure to match the cable colors. 1 DTV/DVD INPUT L- AUDIO -R PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS) L R L R AUDIO L- AUDIO -R S-VIDEO VIDEO L- AUDIO -R Video Digital Broadcasting Receiver (Set-Top Box) Audio Input Select • Select [Component 1 or Component 2] by INPUT pressing the INPUT SELECT button of the SELECT Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Component 1 --> Component 2 --> Video 1 --> Video 2 --> PC. Component1 PC Component2 Video1 Video2 4 4 Select a Desired Channel and Function • Select a desired channel and function by using the Remote Control of Digital Broadcasting Receiver. NOTES: 1) You can select INPUT SELECT while you are using OSD(Menu). Sequence: [Menu] --> [Input] --> [Component 1 or 2 (DTV/DVD)] 2) Digital Broadcasting signals available: 1080i(60Hz), 720p(60Hz), 480p(60Hz) 3) Antenna Connection: Apartment : Check if community antenna receives digital broadcasts. Private Houses: Set the indoor/outdoor UHF antenna to the direction of the digital broadcasting transmitting company. 4) For detailed connection method, refer to the Owner’s Manual of Digital Broadcasting Receiver. 5) What is a component? : Signal with which brightness and color signals are separated, producing a sharp screen. 6) If the Digital Broadcasting Receiver has PC Output terminal (D-sub15pin), connect to ‘PC INPUT’ at the back panel of the PDP. When watching the PDP by PC Input, some undesired signals may be seen at the top and bottom area of the screen. In this case, select [Menu] --> [Screen] --> [Vertical Size] to adjust. 17 Watching Cable Broadcasts • To watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then, connect the digital set-top box for cable TV to the PDP as shown below. Watching Cable Broadcasts 18 Press the Power Buttons • Turn the PDP and the Receiver ON. 2 Connect a CABLE Broadcasting Receiver to the PDP. • Prepare the A/V connecting cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. 1 VIDEO INPUT S-VIDEO VIDEO L- AUDIO -R PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS) L R L R AUDIO L- AUDIO -R S-VIDEO VIDEO L- AUDIO -R Video/Audio Cable Broadcasting Receiver Input Select • Select [Video 1 or Video 2] by pressing the INPUT SELECT button of the Remote INPUT Control or the PDP unit. SELECT • Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Video 1 --> Video 2 --> PC --> Component 1 --> Component 2. Video1 Video2 PC Component1Component2 4 4 Select a Desired Channel and Function • Select a desired channel and function by using the Remote Control of the Cable Broadcasting Receiver. NOTES: * If your local cable company re-transmits digital broadcasts, you may watch normal broadcasts and digital broadcasts simultaneously. For detailed information, refer to your local satellite company. 19 Watching Satellite Broadcasts • To watch satellite broadcasting, subscribe to a Digital Satellite Broadcasting, then connect the digital set-top box for satellite broadcasting to the PDP as shown below. Watching Satellite Broadcasts 20 Press the Power Buttons • Turn the PDP and the Receiver ON. 2 Connect a Satellite Broadcasting Receiver the PDP. • Prepare the A/V connecting cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, ………………. 1 VIDEO INPUT S-VIDEO VIDEO L- AUDIO -R PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS) L R L R AUDIO L- AUDIO -R S-VIDEO VIDEO L- AUDIO -R Video/Audio Satellite Broadcasting Receiver Input Select • Select [Video 1 or Video 2] by pressing the INPUT SELECT button of the INPUT Remote Control or PDP unit. SELECT • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 --> Video 2 --> PC --> Component 1 --> Component 2. Video1 Video2 PC Component1Component2 4 4 Select a Desired Channel and Function • Select a desired channel and function by using the Remote Control of the Satellite Broadcasting Receiver. NOTES: * Picture quality of the Digital Satellite broadcasts is SD grade, and its aspect ratio is 16:9. 21 Watching a DVD Image • Component Input is set to 480i and 480p mode. • Connect the cable from the DVD Video Output (Y, Pb/Cb, Pr/Cr) to the Component Input at the back PDP, and connect the cable from DVD Audio output (Left, Right) to the Audio Input at the back of PDP. Watching a DVD Image 22 Press the Power Buttons • Turn...
Эта инструкция также подходит к моделям:Телевизоры - DP-42SM (2.98 mb)
Телевизоры - DP-42WM (2.98 mb)